0
What else can I help you with?
What equipment is needed to broadcast an HD channel on TV?
The kind of equipment that you need in order to receive HD channels on your television set, is cable box receiver, or a satellite receiver and a satellite dish for one single television set.
Which Yamaha receiver is best for satellite radio you do not need surround sound?
The Yamaha R-S700 is their best stereo receiver with Sirius satellite capability. It is not a surround receiver.
Have satellite dish 75E do you need a special receiver?
Yes, to receive signals from the 75E satellite, you typically need a compatible satellite receiver that supports the specific frequency and modulation standards used by that satellite. Additionally, ensure that the receiver can handle the type of signals broadcasted from 75E. It's important to check the manufacturer's specifications for compatibility with your satellite dish setup.
Can I use my radio for satellite radio or do I need a special kind of radio for that?
Satellite radio requires a special receiver to receive the signal from the satellite. If you do not already have a satellite radio you may be able to install one with your installed radio if you have a open auxiliary jack, otherwise you will likely need to replace your radio.
Can a tv with an internal hd receiver get fta satellite signals?
Yes, a TV with an internal HD receiver can receive Free-to-Air (FTA) satellite signals, provided it has a built-in satellite tuner. To access FTA channels, you'll need to properly align a satellite dish to the correct satellite and connect it to the TV. Additionally, ensure that the TV's settings are configured to scan for available satellite channels. If the TV lacks a satellite tuner, you would need an external satellite receiver to receive FTA signals.
What is it necessary to observe a minimum of four gps satellites to define position?
The GPS receiver measures the distance from it to a GPS satellite. Then it measures the distance to another GPS satellite. The location is somewhere on a line made up of the millions of plaes that these two distances cross each other. A third satellite distance is required to find out where your GPS receiver is, somewhere on that line.This process is called "Trilateration" (Three distances). (Not triangulation).If you want to know how high you are above sea level, you need a distance from a fourth satellite.
How i get nilesat in my receiver?
To receive Nilesat channels on your receiver, you need to correctly point your satellite dish towards the Nilesat satellite position (7 degrees West). Make sure your receiver is compatible with Nilesat frequencies and enter the appropriate settings such as frequency, polarization, and symbol rate for Nilesat channels in your receiver's menu. You may need to refer to the receiver's manual or consult a professional installer for assistance with these settings.
Do you need a new satellite receiver and a new service to watch 1080p satellite programming?
Yes, you will need both new equipment (MPEG-4 equipment) and a different, probably more expensive service from your satellite company.
What type of cable do you need to upgrade a satellite receiver which does not have a serial port and somehow needs to be done direct to its circuit board?
What kind of upgrade are you trying to do?, most upgrades are taken through the satellite stream. if your trying to change the fimware on the receiver then you would need a jtag and a serial cable, there are lots of websites that can give you the information you need and the schematics for building your own. Just Google jtag. Hope it helps. Karp.
Does the laptop receive signals for a satellite?
For a laptop (or any computer) to receive signals from a satellite you must add a receiver card. This could be external (USB interface) or internal (PCMCIA for a laptop, PCI for a regular PC). The receiver card has to be fed signals from a satellite antenna or a satellite dish with amplifier converter, known as an LNB. You do not say what signal you want from the satellite. You can watch TV or download data using a satellite receiver card, for this you will need a subscription with a satellite ADSL provider, who will also offer you the card and the software.
What people meant by Master Pin code or Key when they talk about a Digital Satellite Receiver Why and how the key of a specific digital satellite receiver is used?
Yet another sat receiver hacking question?Do your research on the 'net. It's all there, but you need to actually take the time to read what people are writing, rather than ask questions. This isn't the forum for finding information about illegal activities such as satellite receiver hacking.
How can you upgrade your satellite receiver kaon SKF220?
To upgrade your Kaon SKF220 satellite receiver, you may need to check if there is a software update available from the manufacturer. This can usually be done by checking the manufacturer's website or contacting customer support. Once you have the updated software, follow the instructions provided to install it on your receiver.
