0
Drain partially plugged or the main line has collasped. Bad venting. Tree roots could have got into the drain. Possible quick fix. Fill a 5 gallon bucket 3/4 full and pour it into the bowl as fast as it will take it. This is a much larger volume of water than normal and may flush out the line.
What else can I help you with?
How much water does it take to fill a toilet bowl?
All of it if you don't flush or if it doesn't leak.
Why does the toilet take a long time to fill?
The toilet takes a long time to fill because there may be a problem with the water supply, the fill valve may be clogged or malfunctioning, or there could be a blockage in the plumbing system.
Why does my toilet take too long to fill up after flushing?
There are several possible reasons why your toilet may be taking too long to fill up after flushing. Some common causes include a partially closed water supply valve, a clogged fill valve, a malfunctioning flapper or flush valve, or a problem with the water pressure in your home. It is recommended to check these components and make any necessary repairs or adjustments to improve the filling time of your toilet.
How long does it take for a toilet to fill up completely?
The time it takes for a toilet to fill up completely can vary, but on average it usually takes about 2-3 minutes.
Why does the toilet take a long time to fill up?
The toilet takes a long time to fill up because there may be a problem with the water supply, a clog in the fill valve, or a malfunctioning float valve. These issues can restrict the flow of water into the tank, causing it to fill slowly.
What is wrong if the sink and the bathtub will drain but the toilet wont flush?
The toilet itself is plugged or the pipe from the toilet to the drain is plugged. It may be that the tub and sink have their own drain pipe that may connect to the main away from the toilet drain. Plunge the toilet or sometimes if you fill a 5 gallon bucket with water and pour it into the toilet as fast as it will take it, that will flush out the line. It is a greater amount of water all at once an forces out what the clog is.
Why does my toilet take so long to fill after flushing?
The most common reasons for a toilet taking a long time to fill after flushing are a partially closed water supply valve, a clogged fill valve, or a malfunctioning flapper valve. These issues can restrict the flow of water into the toilet tank, causing it to fill slowly. It is recommended to check and address these potential problems to improve the filling time of your toilet.
How long does urine stink?
It depends what you mean. If you mean how long it takes to get an odor, then it make take a couple of hours to start smelling.If urine is in a toilet, it will stink until you flush it. Sometimes there will be an odor after you flush, and it might be time to clean the toilet. If it is in your clothes, then the smell will remain until you wash them.
How many gallons does it take to flush a low flow toilet?
1.6
Why does my toilet take forever to fill up after flushing?
Your toilet may take a long time to fill up after flushing due to issues with the water supply, a clogged fill valve, a malfunctioning flapper, or a problem with the float mechanism. These issues can restrict the flow of water into the tank, causing it to fill up slowly.
Does it take between two to seven gallons of water to flush a toilet?
Yes. 9 Gallons is the maximum that most flush tanks hold.
How do you remove poop stains from a toilet?
To remove poop stains from a toilet, you can use a combination of vinegar and baking soda. Sprinkle baking soda inside the toilet bowl, then pour vinegar over it. Let it sit for a few minutes before scrubbing the stain with a toilet brush. Flush the toilet to rinse away the stain.
