0
What else can I help you with?
What are the things that hold steel together on ships?
modern ships are welded, older ships use rivets to hold the steel together
What are the parts of a pocket knife?
blade,2 sides of a handle, a spine, rivets to hold the blade and handles together.
What are the main uses for pop rivets?
Rivets are fasteners that hold materials together. Rivets are mainly used in metal construction ,and thousands of rivets are used in building aircraft. Rivets are a very safe and strong metal fastener.
What is the maximum capacity of the Eiffel Tower?
The Eiffel Tower can hold 5,000 people at once. About 3,000 people can be on the first platform at one time. The second platform holds 1,600 people, and the summit of the tower can hold 400 people.
How do you remove a factory door handle on a 1991 Ford Mustang when it is held on with rivets?
Just drill the rivets out and use new rivets to hold the handle in place.
The Eiffel tower shrinks 6 inches in winter?
The Eiffel Tower in Paris is 300m high and is made of steel. Between Summer and Winter its height changes by as much as 7.5cm. This is because in: a) SUMMER, due to the heat the attractive forces become slower and unable to hold the molecules at the correct places so we get shorter. b)WINTER, the opposite process to the above takes place in Winter and is known as contraction. Notice than in hot, Summer sunny days, due to the same phenomenon, the side of the tower exposed to the sun shows some dilatation; owing to that dilatation following the course of the sun, the Eiffel tower summit looks smaller a it but its just us getting taller.
Is the Eiffel tower held up using the method 'Triangulation'?
No, sadly it is much simpler than that. There are concrete pillars that stretch deep underground that hold "La Grande Tour" up.
What causes car to let off a screching sound when brakes are being mashed?
Screeching can be caused by two things and both indicate the brakes are worn to the point of needing replacement. The brake pads have rivets in them to hold them together and when they wear down to the rivets the rivets screech. The other thing is on disc brakes there is a wear sensor that drakes against the rotor if the brake pad get too worn.
How do you remove the rivets on the bracket that hold the ignition coil on?
To remove the rivets that hold the ignition coil to the bracket: 1. Use a file or grinder to remove the head of the rivet on the bracket. 2, Use a suitable punch and drive the body of the rivet out of the bracket.
How are the rivets being used to hold two metal plates tightly?
Rivets are used to join metal plates by passing them through holes in both overlapped plates. The ends of the rivets are then hammered over, flattening the heads, which prevents them from pulling back through the hole.
Why metal rivets used in construction work red hot when they are hammered in place?
The rivets are heated to red hot so that they are more pliable (softer). When placed in the holes bored for them hydraulic hammers are used on both sides of the rivet to hammer then against the surface they are to hold. When they cool down they contract pulling the surfaces of the metal together even tighter.
How is gravitylightenergy and matter used?
Gravity: to drop pennies on people from the Eiffel Tower. Light: to make super scary faces in the dark with a flashlight. Energy: to run to the grocery store because your lover wants Nutella. Matter: to hold things that do.
