Ti ti ti ti ti ti ta. Ti ti ta. Ti ti ta. Ti ti ti ti ti ti ta. Ti ti ta ta.
Head and shoulders knees and toes...
yes but you have to tune down your strings
The Bridge
basically get the tune down if you have the tune down your good
To properly adjust a Floyd Rose bridge on your guitar, follow these steps: Loosen the strings to relieve tension on the bridge. Use an Allen wrench to adjust the bridge height and level it with the guitar body. Tune the guitar to pitch and check the bridge's alignment. Fine-tune the bridge by adjusting the spring tension in the back cavity. Re-tune the guitar and test the bridge's stability. Remember to make small adjustments and re-tune frequently for the best results.
you must to lock the bridge block with a couple of pieces of wood o whatever, but put atention in the correct bridge angle, now you can tune perfectly you guitar, after this unlock the bridge. you must to lock the bridge block with a couple of pieces of wood o whatever, but put atention in the correct bridge angle, now you can tune perfectly you guitar, after this unlock the bridge.
dont tell me what to do
Metalingus by Alter Bridge
if the cello is out of tune, try the fine tuners that should be farther down than the bridge. If fingering is off try to match it with a piano or something.
it's the bridge that is used by default by Gibson and epiphone an their SG and les pual guitar's, they can also be found in other guitars aswell. the stop tail piece comes with most of the tune o matic bridge guitars. tune o matics only modify the guitars intonation.
The Floyd Rose bridge on your guitar can go out of tune after a dive bomb because the intense pressure and movement of the bridge during the dive bomb can cause the strings to stretch and the tuning to shift.
A Floyd Rose bridge on a guitar may not stay in tune due to factors such as improper setup, string stretching, or changes in temperature and humidity. The floating design of the bridge can make it more sensitive to these factors, causing tuning instability.