To add Freon to a 1989 Jeep Comanche, locate the low-pressure service port on the air conditioning system. This port is typically found on the larger diameter aluminum line, usually near the compressor. Remove the cap and attach the recharge hose from the Freon canister to the port, then follow the instructions on the canister to add the refrigerant properly. Always ensure the AC system is running and follow safety precautions.
its a closed system, no cap. Add fluid to the plastic container. You can convert to an open system, but that's not cheap. www.jeepmj.com
Jeep Grand Cherokee cooling system through the low port on the air conditioning compressor. Connect your Freon bottle to the port and discharge.
JC Whitney and Quadratec both sell kits to add aftermarket airconditioners with factory specs.
To check the transmission fluid on a 1990 Jeep Comanche, first ensure the vehicle is parked on a level surface and the engine is running at normal operating temperature. Locate the transmission dipstick, which is typically found near the back of the engine compartment, and remove it. Wipe the dipstick clean, reinsert it, and then remove it again to check the fluid level; it should be between the "Full" and "Add" marks. If necessary, add the appropriate type of transmission fluid through the dipstick tube to reach the correct level.
The conditioning will add to the total cost of the treatment.
There is no such thing as Air Conditioning coolant.
Yes
Adding freon to an air conditioning unit should only be done by a certified technician. It is in fact illegal for anyone to add freon to air conditioning that isn't properly certified, so one would add freon by calling in a certified technician to do it for them.
You can add air conditioning refrigerant to your 2000 F1 50 pickup truck air conditioning system through the low pressure port. The low pressure port will be on the top of the air conditioning compressor.
6 quarts total capacity. The Crankscase oil capacity is 5 quarts. Add one additional quart when the oil filter is changed.
add r134a to the service port