The cover is snapped on so you will need to squeeze both sides slightly and pull on it. Once the cover is off twist the back of the light till it unhooks from the housing unit.
remove the trunk lining or bend it back easy where the brake light is to access it and change it out.
If you are referring to the right and left ones, pull the carpeting away and you will find like 4 nuts that you remove and the whole assembly comes out to change the bulb or bulbs. The 3rd brake light in the rear window has two bulbs which you get to from the trunk. If you are referring to the right and left ones, pull the carpeting away and you will find like 4 nuts that you remove and the whole assembly comes out to change the bulb or bulbs. The 3rd brake light in the rear window has two bulbs which you get to from the trunk.
If you mean the brake light, you just have to change the bulb or bulbs.
You have to remove the trunk liner from the rear of the car,and then remove the three bolts that hold the taillight into place.
change the fuse if not replace flasher
what do you have to do to change the center brake light
you need to change the multifunctional switchthis happened to mine to
In the top of the trunk near where the brake light is located, there is a small plastic window, remove it and you access the light bulb.
WHICH brake light?
did you figure out how to? mine has the same problem
To change the rear window brake light on a 2001 Lexus LS 430, first, open the trunk and locate the plastic cover panel above the rear window. Carefully pry off the cover using a flathead screwdriver or trim tool to avoid damaging it. Once removed, unscrew the light bulb socket, twist it counterclockwise to release it, and replace the old bulb with a new one. Finally, reassemble the cover panel and test the brake light to ensure it works properly.
Break light fuse