To change the rear window brake light on a 2001 Lexus LS 430, first, open the trunk and locate the plastic cover panel above the rear window. Carefully pry off the cover using a flathead screwdriver or trim tool to avoid damaging it. Once removed, unscrew the light bulb socket, twist it counterclockwise to release it, and replace the old bulb with a new one. Finally, reassemble the cover panel and test the brake light to ensure it works properly.
If you grab the cover and pull it twards you it will come off.
how to change front brake pads on a 1994 lexus es300
if you have a Nakamichi sound system i assume you have a speaker grill before the third brake light by the back window. If so, no problem. Just stick a flat head screwdriver under it and prye it open. Once it opens its easy from there, the difficult part is prying the grill/light open.
1992 Lexus es300 wear the thermostat is located
The brakelight sensor is located on the brake switch, which is on top of the brake pedal and held on with a 14mm jam nut.
You can change the rear brake pads on a lexus GS3000 by loosening the lug nuts slightly for the wheels, raise and support the vehicle safely, remove the wheels.
did you figure out how to? mine has the same problem
how do i change the oil mainance warning light on lexus rx330 2005 year model
the plastic cover should pop right off exposing the bulbs
In the top of the trunk near where the brake light is located, there is a small plastic window, remove it and you access the light bulb.
Lexus IS300 3rd brake light is changed from the back seat. Pry the light up and disconnect wiring. Replace bulb and put back together. Easy job
Remove the wheels and remove the 2 14mm headedbolts from the caliper and lift caliper from brake pads www.lextechautomotivellc.com