umm... idk. maybe it means a ghost named Sarah is coming to get u. she will suffocate u by shoving peanut butter up ur nose.
Spider angels sent from heaven
Yes, a brown ceiling fan will look great with white walls. Just avoid a white ceiling fan, or this will wash the room out and make it look stark and boring.
Yes, as long as they are both the same base, you can mix many paints.
There is no actual real significant difference, besides the color. A black ceiling fan works the exact same as a white ceiling fan. Of course, the brand of the fan might make a difference, though the color of the fan will not.
The ceiling adapter is white but simulates wood. Can be painted over to any color desired.
To wire a ceiling fan with a light switch, follow these steps: Turn off the power to the circuit at the breaker box. Install the ceiling fan bracket to the ceiling. Connect the fan wires to the corresponding wires in the ceiling box (usually black to black, white to white, and green to ground). Connect the light kit wires to the corresponding wires in the ceiling box (usually blue to black and white to white). Install the fan blades and light kit. Install the light switch and connect the wires (usually black to black, white to white, and ground to ground). Turn the power back on and test the fan and light switch. For a visual guide, refer to the diagram below: Diagram of ceiling fan wiring with light switch
Woof is in the little green and white striped boat closest to the front on the right hand side. his tail is hanging out the side.
On the streets or in our houses
If both wires are black, the one that connects to your white wire is the one that should have little writing on it. Black to the plain black wire, white to the wire with writing.
Yes.
KILZ is one maker of this paint. It is sold and Wal-Mart and other retailers. It paints on a light pink to see where you have painted, but dries ceiling white.
The mounting plate for a ceiling light is designed to be mounted to a round or octagonal ceiling box. Very often these can be installed in existing structures without too much trouble. Without the box it is a code violation. Splices must be in enclosures and hanging loose in the ceiling doesn't qualify. If you do not have a box in the ceiling, you might consider installing a box ON the ceiling. It would be only 1 to 1 1/2 inches deep. Your splices would be safely inside. These boxes are typically used in outside installations and come in white or gray and take paint nicely so no one may ever notice. This type of installation is acceptable if the box is properly mounted.