This was a tough one!
From the red wires: add wires vertically; then elbow right; connect to the wires already there; wires up; elbow right; connect to "T".
From solar panel just wire straight up to wires already there.
This will probably mess up what you thought was easy light and gear connections.
So here are the gear connections.
From generator: Put belt vertically on gear farthest left; connect with gear just above light eye - just below wire; gear to right; belt down and gear; gear to left; belt to the leftand gear; gear left; belt up and gear.
and light connections.
from first reflector: second reflector placed down below everything, reflecting left; third reflector level with eye reflecting right. AND YOUR DONE!
This was a tough one! From the red wires: add wires vertically; then elbow right; connect to the wires already there; wires up; elbow right; connect to "T". From solar panel just wire straight up to wires already there. This will probably mess up what you thought was easy light and gear connections. So here are the gear connections. From generator: Put belt vertically on gear farthest left; connect with gear just above light eye - just below wire; gear to right; belt down and gear; gear to left; belt to the leftand gear; gear left; belt up and gear. and light connections. from first reflector: second reflector placed down below everything, reflecting left; third reflector level with eye reflecting right. AND YOUR DONE!
This was a tough one! From the red wires: add wires vertically; then elbow right; connect to the wires already there; wires up; elbow right; connect to "T". From solar panel just wire straight up to wires already there. This will probably mess up what you thought was easy light and gear connections. So here are the gear connections. From generator: Put belt vertically on gear farthest left; connect with gear just above light eye - just below wire; gear to right; belt down and gear; gear to left; belt to the leftand gear; gear left; belt up and gear. and light connections. from first reflector: second reflector placed down below everything, reflecting left; third reflector level with eye reflecting right. AND YOUR DONE!
plug them in
plug them in
Answer why does the person who made a circuit a probably connect the wires to a penny
2 wires
Wires just connect electricity cords/outlets.
from the wires and they connect them
Yes, you can connect the light fixture wires to the house wires by matching the colors appropriately. The black wire from the fixture should connect to the red wire from the house, as both typically serve as "hot" wires. The white wire from the fixture should connect to the white wire from the house, which is the neutral. Finally, connect the ground wires (bare or green) together to ensure proper grounding.
okay. connect the wires FIRST than put the BIG WHEEL in the little box that the wires made(on the right side) THAN use the SHORT belt to connect the red great and the BIG WHEEL. After you did that get the LITTLE GEAR and put it at the bottom of the BIG WHEEL and get the big belt and connect the little gear with the big gear that was aready there!!
with wires
Distributor