Asus Vs228H has Vsync which enables users play a number of games.
Start a game, go into the options/settings, click video, click advanced and check "Enable Vsync" Personally I don't see why anyone would want to enable vsync, so don't do it. Alternatively you could go into your driver and find image quality and settings and enable it in there.
Asynchronous flip is the opposite of vertical synchronization(known as VSync). So when asynchronous flip is on VSync is off. http://www.intel.com/support/graphics/sb/cs-004692.htm http://www.tweakguides.com/Graphics_9.html http://en.wikipedia.org/wiki/Vertical_sync
The process "igfxtray" is a software application associated with drivers for the integrated Intel graphics 810x chips. You can use the application to accomplish tasks such as changing resolution and enabling or disabling Vsync.
Lower the video settings: change graphics to fast. set smooth lighting to off. 3d anaglyph to off. particles to minimal. Render distance to tiny. performance to max fps. view bobbing to off. clouds to off. set vsync to off.
You can use ffmpeg to extract a single frame from a video by specifying the input video file and the output image file with the desired frame number. Use the command "ffmpeg -i inputvideo.mp4 -vf select'eq(n,framenumber)' -vsync vfr outputimage.jpg" to extract the frame.
Try downloading the performance mod and updating all your drivers oh and disable vsync through the skyrim.ini, disable antialiasing too.
To extract a specific frame from a video file using ffmpeg, you can use the command: ffmpeg -i input.mp4 -vf "selecteq(n,framenumber)" -vsync vfr output.jpg Replace input.mp4 with the name of your video file, and framenumber with the specific frame number you want to extract. This command will save the extracted frame as output.jpg.
CRTs don't have a 'native' resolution, which means they can display a range of resolutions comfortably depending on what you prefer. LCDs can too - but anything apart from native won't be sharp. CRTs also generally support higher refresh rates, so aren't prone to tearing as much. Tearing can be resolved by ensuring VSYNC is enabled in whatever game you're playing.
This connector is present on the Macintosh LC, LC II/Performa 400, IIci, IIsi, Quadra 700, Quadra 900/950, Macintosh Duo Dock, and Duo MiniDock. {| ! Pin ! Name ! Description | 1 RED.GND Red ground 2 RED.VID Red video signal 3 /CSYNC Composite synchronization signal 4 SENSE0 Monitor sense signal 0 5 GRN.VID Green video signal 6 GRN.GND Green ground 7 SENSE1 Monitor sense signal 1 (grounded internally) 8 n/c Not connected 9 BLU.VID Blue video signal 10 SENSE2 Monitor sense signal 2 11 C&VSYNC.GND Ground for CSYNC & VSYNC 12 /VSYNC Vertical synchronization signal 13 BLU.GND Blue ground 14 HSYNC.GND HSYNC ground 15 /HSYNC Horizontal synchronization signal Shell CHASSIS.GND Chassis ground |}
You can use ffmpeg to extract a frame from a video by specifying the input video file and the output image file with the desired frame number. The command would look like this: bash ffmpeg -i inputvideo.mp4 -vf "selecteq(n,framenumber)" -vsync vfr outputimage.jpg Replace inputvideo.mp4 with the name of your video file, framenumber with the specific frame number you want to extract, and outputimage.jpg with the name you want to give to the extracted frame.
The phenomenon you are describing (radial lines randomly running towards the edge of the screen) is definitely related to video settings or drivers. Although it has been reported a lot, no clear solution exists except to fiddle with the display settings. You can try the following: 1) Update your Video Card drivers and any related software. 2) In the video settings of World of Wacraft, try to check and uncheck Vsync, Triple Buffering and keep the refresh rate at 60 Ghz or below. Alternatively, set the graphic settings to the lowest possible, do a game restart, and then put the settings back to what they were. Vsync seems to be the most common culprit - if it isn't checked (on), make sure it is and vice versa. 3) If that doesn't work, try to check on the same settings in your video card setup program. If nothing seems to help, try and do a search on the World of Warcraft tech support forums to see if any up-to-date information regarding this issue is available.