0
What else can I help you with?
Can you put a dimmer switch rheostat on a halogen light fixture?
Halogen lamps that run at line voltage (regular house wiring - 120V AC) work the same as incandescent bulbs on dimmer switches. But, if the light fixture is running off a transformer, then it is important to find out if the transformer is dimmable, as some low-voltage fixtures cannot be dimmed. If dimable, 12-volt or 24-volt Halogen lighting fixtures require special dimmers (Low-Voltage Dimmers). There are two types of transformers for low-voltage lighting (Magnetic (MLV) or Electronic (ELV)). Magnetic transformer use copper, wound around a steel core which is inductive (magnetic field). Electronic transformer is an electronic circuitry which is capacitive (electric field). Before selecting a dimmer, determine what type of ballast is in the lighting fixture. Magnetic low-voltage dimmers are rated in volt-ampere (VA). The wattage rating is provided only as a reference and indicates the lamp wattage that can be used. Electronic low-voltage dimmers are rated in watts, which is also the lamp load connected to the transformer.
Can you put fluorescent tubes on a dimmer switch?
Yes, as long as it is just incandescent bulb lighting connected to the track. If there is a transformer between the voltage source from the track and the light bulb (e.g. low voltage quartz bulbs) then these fixtures can not be dimmed.
What kind of light fixtures can you get with the low voltage lighting?
You could get low voltage landscape lighting for as little as $4.00. You can also use light Kichler and wash lights. There are a variety of outdoor light fixtures to choose from. It all depends on your budget.
What does the acronym mr16 stand for?
The acronym MR16 stands for Multifaceted Reflector and they are types of halogen light bulbs. They are often used as light fixtures in ceilings for kitchens and bathrooms.
How to wire a double switch for controlling two separate light fixtures?
To wire a double switch for controlling two separate light fixtures, you will need to connect the power source to the common terminal of the switch. Then, connect the wires from each light fixture to the corresponding terminals on the switch. Make sure to follow the wiring diagram provided with the switch and turn off the power before starting the installation.
Are all 480 Volt light fixtures 3 phase or are some single phase?
I do not believe any lighting fixtures of any voltage have ever been made to work off of three-phase circuits. Light Fixtures are always single-phase 2-wire circuits In the USA the standard voltages for branch circuits are: 120, 208, 240, 277 or 480 The light fixture must be rated to match whichever field voltage is being used. Some light fixtures are made multi-rated so they can be used on more than one circuit voltage
How can I properly wire a 3-way switch for hooking up multiple light fixtures in a circuit?
To properly wire a 3-way switch for multiple light fixtures in a circuit, you will need to connect the power source to the common terminal of the first switch, then connect the travelers to the corresponding terminals on both switches. Finally, connect the light fixtures to the load terminal of the second switch. Make sure to follow the wiring diagram for 3-way switches to ensure proper installation.
What light transformer does the lightolier 2000lv come with?
The Lightolier 2000LV typically comes with a low-voltage transformer designed to support its halogen or LED fixtures. This transformer converts standard line voltage to the necessary low voltage required for optimal operation of the lights. The specific model may vary based on the installation and configuration, so it's advisable to check the product specifications or manual for precise details.
How can I put a ceiling fan and light on the same switch?
To put a ceiling fan and light on the same switch, you can use a dual-function switch that controls both the fan and light simultaneously. This type of switch allows you to operate both the fan and light with a single switch, simplifying the control of both fixtures.
How can I use a multimeter to check a light switch?
To check a light switch using a multimeter, set the multimeter to the voltage setting. Turn off the power to the switch at the circuit breaker. Remove the switch cover and use the multimeter to test the voltage at the switch terminals. If there is voltage, the switch is working. If not, the switch may be faulty. Remember to always follow safety precautions when working with electricity.
Is it ok to use a 120v light switch in place of a 125v light switch?
It is generally not recommended to use a 120v light switch in place of a 125v switch. The voltage rating of the switch should match the voltage of the circuit to prevent potential safety hazards such as overheating or electrical arcing. It's best to use a switch that matches the voltage of the circuit.
How do you wire a 220 volts light?
The light is wired the same as any voltage fixture. Bring the source voltage to the fixture and connect it to the two fixture wires. If you want to control the off-on of the fixture take the source voltage to a switch first and then out of the switch to the light fixture.
