It has a little button in the rear left hand corner on the bottom. This is an interlock switch. If it's not being pressed securely the shredder won't work. Just look for the little switch, press it and the shredder will work again.
Yes, you can replace the switch in the Aurora paper shredder Model AS1712X. To do so, you'll need to disassemble the shredder carefully, ensuring you disconnect it from the power source. Check for the specific type of switch used in the model, and then you can replace it with a compatible switch. Always refer to the manufacturer's instructions or seek professional assistance if you're unsure about the process.
its on the distributor
Just try to push blocks into the trigger{
You mean a lever or a trigger? a lever is a doodad and you can build it from the doodad builder in map editor. same with the trigger but the trigger isn't a doodad and you need to set it in the trigger editor
Large a.c. currents with a small trigger signal.
You trigger the switch, then leave.
A turn signal that doesn't shut off when you straighten your wheel means the trigger inside is probably broken. To repair it you will probably need to replace your turn signal switch
By 1917 Black and Decker patented the first pistol grip, trigger switch electric drill.
Most power drills have a reverse switch near the trigger.
you put batteries in turn the switch then pull the trigger 0____0
A momentary switch closes or opens a circuit briefly, then returns to its normal state. This type of switch can be used to trigger real time events in electronics in fractions of seconds.