0
What else can I help you with?
Why is my light fixture flickering?
Your light fixture may be flickering due to a loose bulb, a faulty connection, or a problem with the fixture itself. It could also be caused by fluctuations in the electrical supply.
Is a pool spotlight different from a regular outdoor flood light?
yes a pool light is typically a sealed unit. this is to prevent water from entering the light and coming in contact with the electrical components of the light. if water were to enter the light it could damage the light fixture and also trip the light breaker or gfci. in addition in some situations if the light were not installed correctly/electrically protected correctly (with breaker and gfci) could cause a dangerous situation to bathers. to change the light bulb in a pool light fixture the light fixture must be brought above the waters surface and the lense with lense gasket removed bulb changed then lense with lense gasket replaced and the light reinstalled in the light niche in the wall of the pool below the waters surface. you must also use the appropriate bulb for the light fixture. this is not as simple as just picking up a bulb from home depot and threading it in as you would do with an outdoor flood light. light repairs should only be performed by a trained pool professional as it could be dangerous if not done correctly.
How do you replace an underwater light fixture not just the bulb?
This is better left to the professional who knows the ins and outs of swimming pool lighting , GFCI's and codes in your area. He will also know which best fits and is compatible with the current housing or nitch. He will also know how long of a cord to order with the new light fixture. Code may also require that there be update modifications done to the conduit and location of the GFCI box. Ken
How do you loosen a light bulb that is stuck in the fixture?
One way to loosen a light bulb that is stuck in the fixture is to break the bulb. You can then use half of a potato to unscrew the bulb from the fixture. You can also make a loop with duct tape, adhere the middle of the loop to the light bulb. Use the two ends to twist the bulb out of the fixture.
How do you convert a swivel recessed light to accept the pendant light kit?
To convert a swivel recessed light to accept a pendant light kit, you will need to remove the existing recessed light fixture and install a pendant light fixture in its place. This typically involves disconnecting the wiring for the recessed light and attaching it to the pendant light fixture according to the manufacturer's instructions. You may also need to install a mounting bracket to support the pendant light fixture.
How can I convert can lights to pendant lights in my home?
To convert can lights to pendant lights in your home, you will need to remove the existing can light fixture and install a pendant light fixture in its place. This typically involves disconnecting the wiring, removing the can light housing, and installing a mounting bracket for the pendant light. You may also need to adjust the height of the pendant light to suit your space. It is recommended to consult a professional electrician for this task to ensure safety and proper installation.
The thermostat housing leaks on my 1985 silverado after I replaced the thermostat?
Most older Chevy silverados use a rubber gasket around the thermostat itself... the upper housing also has a rubber gasket built into it. Did you move the gasket from the old one & put it on the new one? There is also a paper gasket you can use, but you need a lot of permaseal & it isn't as good. Most parts store will have the rubber gasket & it's about $1.00
What are the benefits of installing a totally enclosed light fixture in a bathroom?
Installing a totally enclosed light fixture in a bathroom can provide several benefits. It helps to prevent moisture and steam from entering the fixture, reducing the risk of electrical hazards. It also protects the light bulb from water damage and prolongs its lifespan. Additionally, a totally enclosed fixture can enhance the overall safety and aesthetics of the bathroom.
Who to remove glued-on bathroom light fixture from mirror?
To remove a glued on bathroom light fixture from a mirror, the best product to use is WD-40. Spray on the WD-40 and wait a few minutes while holding up the light fixture so it will not suddenly fall. Gently pull on the light fixture while using a putty knife to scrape the area underneath the lamp next to the mirror. Glue residue can also be cleaned up with the WD-40 after the fixture releases.
What other that the housing could cause a 96 cavalier to be spraying out tranny fluid or is it the housing?
Check the lines for the transmission fluid that run to and from the radiator. It could also be a bad gasket.
How do you or where can you find a rebuild kit installation guide for an oil filter housing bracket oring and gasket kit I have a 1993 Chevy Suburban with a 35o Engine?
Felpro sells a gasket set for this problem part number ES72671 Remove the oil filter there are two hex screws that are 1/4 inside the housing remove these. You may have to wiggle the housing a little to get it loose. There are also two oil cooler lines running to the housing you can remove both, I only removed the top one. There is a place for the O-Ring on the housing,the gasket goes on top of the housing.
How can I find a suitable recessed light cover replacement for my fixture?
To find a suitable recessed light cover replacement for your fixture, measure the diameter of the existing cover and search for a replacement cover that matches those dimensions. You can also check with the manufacturer of your fixture or visit a home improvement store for options.
