0
Within reason, yes. According to Michael W. Smith II's BleachCalc program, you should add about 160 oz (weight) of dry borax for each 10,000 gallons. It supposedly helps against algae, although we use it to raise the water's pH and to buffer the pH at the level we want. Additionally, it doesn't evaporate or lose effectiveness with the sun. You only should have to replenish after backwashing your filter (when adding refill water.)
The target is supposedly 50 parts per million of tetraborates, so, considering each box holds 76 ounces, a 20,000 gallon pool should have about 4 and 1/3 boxes poured and mixed in. It doesn't hurt your skin to mix by hand, although it dissolves rather quickly by itself with the pump running. (Break up any large clumps.) In any case, start slowly (1/2 box per 10,000 gallons) and have something on hand to lower pH, because it will raise your pH pretty quickly. Small amounts of Muriatic acid works well to lower the pH after you test a few hours later. Also make certain the borax is just that. (It must NOT contain detergent!)
What else can I help you with?
Is Borax added to a swimming pool safe for people?
Borax is perfectly safe in swimming pools. We started using it in our inground pool two years ago and would not use anything else. Not only is it less expensive (a lot less expensive) but the water feels softer when we use it. My husband had to spend some time convincing me that Borax works and works safely but I'm very glad he did. Our pool has never looked better. We had been buying every product that the pool store told us we needed (we did need it didn't we?) One summer they couldn't get our pool water cleared up so in frustration my husband turned to the internet and the use of Borax. We saved a bundle and our pool cleaned up beautifully. Hope this helps you.
Can you use borax in biguanide pool?
No, it is not recommended to use borax in a swimming pool treated with biguanide sanitizer. Borax can interfere with the biguanide's effectiveness and potentially create an unstable pool environment. It is best to follow the manufacturer's instructions for maintaining the pool while using biguanide.
How much borax do i put in a 30000 gal pool?
You can add 5-10 pounds of borax for every 10,000 gallons of water in your pool. For a 30,000 gallon pool, you would need to add 15-30 pounds of borax to adjust the pH and alkalinity levels. Be sure to test the water after adding borax to ensure the levels are within the recommended range.
How do you make homemade pool algaecide?
A person can make a homemade pool algaecide by combining bleach, baking soda, and Borax. This shocks the pool and increases the pH if needed.
How long after using borax can swim in your pool?
It is recommended to wait at least 24 hours after adding borax to your pool before swimming to allow it to fully dissolve and distribute evenly in the water. This will ensure that the pH and alkalinity levels are balanced and safe for swimming.
Can you use 20 mule team borax to raise pH?
No, 20 Mule Team Borax is not recommended for raising pH in a pool or spa. It is primarily used as a laundry booster and cleaner. To raise pH in a pool or spa, you should use specific pool chemicals like soda ash or sodium carbonate.
Can you use borax to raise alkalinity?
Yes, borax can be used to raise pH levels in a pool, but it is not recommended for raising alkalinity as it can affect the pH levels without significantly impacting the alkalinity. It is better to use baking soda or soda ash to raise alkalinity in a pool.
How much borax to raise alklinity?
In the words of the song, where you are usually depends on where you start. In your case, that means that without knowing the size of your pool and how acidic is is to start with, no one can tell you how much to add to bring it up.
Can bleach baking soda and borax all be added at the same time to a 30000 pool?
Yes, but it's not generally a good idea. Both will tend to raise your pH. If your pH is too low, add the borax first, to get it to at least 7.0. Then you can add baking soda, if you need to increase your alkalinity. BUT, you should check your alkalinity after you raise your pH -- it will be higher, and you may not need the baking soda.
Slide On In, Jump Right Out?
One of the most common pool accessories that people have added to their pool is a diving board or sliding board. A diving board needs to be added to the deepest part of the pool so that those who jump off of it do not hit their head on the bottom of the pool. The sliding board can be placed at any side of the pool as long as the water is deep enough for the person sliding to not get hurt.
Can a vinyl liner be added to a pool?
No
What are borates and why do you want them in your pool?
I have never heard that you want them in your pool,Nor have I ever had anyone want to add any, Although Borate or Borax (Na2B4O2(H2O)10) is a low-toxicity mineral with insecticidal, fungicidal, and herbicidal properties.But I would not suggest putting them in your pool. People do want them in their pools. Please see http://www.troublefreepool.com/so-you-want-to-add-borates-to-your-pool-why-and-how-t4921.html?hilit=BORATES
