Smoothen it out with a rag.
If it functions like a typical m4 style airsoft gun with an adjustable hop up, then the charging handle opens the dust cover to reveal the hop up.
Timing marks are on the top of the timing gear rear cover. With the cover off, these marks will line up with the timing marks on the intake and exhaust gears when the crankshaft gear timing mark faces down to its mark at the bottom. Good luck!
cover up the cracks in your house
to cover up use a heavy base or concealer to heal use oral antibiotics and local cream like polysporin
foundation?.. but you really should not use make-up, all that does is cover it up.. not help to prevent it. You should try stretch mark creams.
to cover up the burn marks from when it burned down in 1812
to cover up the burn marks from when it burned down in 1812
Hi the timing marks are 1 on the bottom plastic cover at approx 12 clock the other on cam pulley behind line it up with the tappet cover hope this helps cheers Peter
on the left side case cover there is A black plug look for mark with (T) next to mark . Up top cam chain cover, the gear will have A mark it should be up .. Under tim. gear there is two marks they should be side to side marks in cover......hope it helps....;
ignition timing marks are on front cover above crank pully. Timing belt marks, above crank gear at 2 o'clock position there is a notch, and top cam gear has hole which lines up with hole in cover with 1\8 drill bit.
on the crank, there is a key and keyway it should be strait up. this will get you close. and the cam pully has mark's on either side and a marking that says up where your valve cover connects to the head, put the up up and the marks each lined up with where the valve cover connects one on each side. then fine tune the timing by puting the mark on the crank pully on the mark on the timimg belt cover. you are now timed!
There are three marks to line up... before you remove the lower timing belt cover there are the marks on the little gauge that is integrated into the cover that line up with a mark on the main crankshaft pulley (to actually time it while the engine is running) there are also marks on the camshaft sprocket (big sprocket at the top of the engine seen with the upper timing cover removed), that lines up with a white mark on the upper rear plastic timing cover. And finally if you replace the timing belt there is a mark on the crankshaft sprocket that lines up with a mark cast in the face of the aluminum engine block. mnemonic76 1988 Pickup owner