0
What else can I help you with?
Can you use a torque wrench in both directions?
Yes, you can use a torque wrench in both directions.
How do you use a torque wrench when the manual says to use a foot pound torque?
Use a torque wrench that is graduated in ft. lbs or do the math.
What does a mechanic use to tighten a car wheel?
A torque wrench, usually a power torque wrench
If you add an exton to your torque wrench does it change the torque?
as long as your extension is 90 degrees from the handle it will not affect your torque wrench. if you use a super long torque wrench you may lose a little torque in the extension it self but should not affect torque. an extension affecting the wrench in lenght like a crows foot will affect torque as long as your extension is 90 degrees from the handle it will not affect your torque wrench. if you use a super long torque wrench you may lose a little torque in the extension it self but should not affect torque. an extension affecting the wrench in lenght like a crows foot will affect torque
Do you need to use a torque wrench to loosen retractor seatbelt bolt on vw caravelle?
You don't use a torque wrench to loosen ANYTHING. -It is only for tightening nuts and bolts to the correct torque.
Can you use an automotive torque wrench for gun work?
No
Why shouldn't an impact wrench be used in place of a torque wrench?
An Impact wrench is for a totally different use. A torque wrench will let the user know when a certain torque has been achieved in tightening. The impact wrench is for removing very tough nuts under impact of a hammer.
How do you use an angular gauge on a torque wrench?
After torqueing I would use a regular ratchet with the angle gauge so you don't damage or through off the torque wrench calibration.
How can I properly use a torque wrench for cycling maintenance?
To properly use a torque wrench for cycling maintenance, first, select the correct torque setting for the specific component you are working on. Next, ensure the wrench is properly calibrated and set to the desired torque level. Then, apply the torque wrench to the bolt or nut and turn it until you hear or feel a click, indicating that the correct torque has been reached. Avoid over-tightening, as this can damage the component.
What does a mechanic use to tighten nuts?
spanner or a torque wrench
Does loosening a bolt with a torque wrench hurt the torque wrench?
yes
Why is my torque wrench not clicking when I use it?
Your torque wrench may not be clicking because it could be out of calibration, the internal mechanism may be damaged, or the torque setting may be too low for the fastener you are tightening.
