0
What else can I help you with?
Has anyone heard of a Springfield Stevens model 5000 410 double barrel with a single trigger?
I have one. Case hardened receiver, solid rib. Interestingly, in looking a the single trigger, there is a slot next to it (underside of receiver)which contains a piece of metal which does not protrude below the receiver. It's as if it was a double trigger converted to single trigger. I have no idea. It was made before 1948. I use it to this day, got four chuckars just yesterday. It just puzzles me. The side of the receiver says Stevens and next to it "model 5000" and it has an engraving of a pointer on the receiver as well. ????
What is the value of a model 59 Winchester shotgun with a fiberglass barrel and aluminum receiver and a gold ionized trigger guard?
$200-$350 depending on condition. We are always interested buyers on pre-64 Winchester rifles and shotguns. sales@countrygunsmith.net
How to remove bolt from Remington model 514?
To remove: Open action, press trigger rearward and pull bolt entirely from receiver. To install: Insert bolt in receiver, push bolt over plunger in bottom of receiver, pull trigger and complete forward travel of bolt; then rotate bolt handle downward to lock.
What is the value of a Marlin Hammer Pump shotgun?
Depends on the model, and condition. Model number should be under the receiver, or on the top tang, unless it is a model 1898, which had no markings to indicate model.
How do you assemble trigger on Stevens model 940E shotgun?
To assemble the trigger on a Stevens Model 940E shotgun, first ensure the shotgun is unloaded and safe to work on. Begin by inserting the trigger mechanism into the receiver, ensuring that the trigger spring is correctly positioned. Align the hammer and sear components, then secure them with the appropriate pins. Finally, test the trigger function before reassembling the shotgun completely to ensure everything operates smoothly.
What is the purpose of the two screws on top and rear of the receiver and one screw on the top of a JC Higgins Model 31?
the one on the side holds the trigger group in the receiver . the one on top has to do with the scope mount wich is unique to these guns
How do you disassemble a Remington Model 7600?
Disassemble to do what? To remove the trigger group you need to push out the two pins in the receiver to remove the trigger group. To remove the bolt you need to take the barrel off which requires an armorers barrel wrench.
Where is the serial number on Winchester model 04 22 rifle?
On a Winchester Model 04 .22 rifle, the serial number is typically located on the underside of the receiver, near the trigger guard. It may also be found on the left side of the receiver. If the rifle has been disassembled, the serial number can sometimes be found on the barrel or other components, but the receiver is the most common location.
What is the value of a eton silver inc coffee urn model?
What is the value of eton silver coffee urn mint condition
What are the differences between Stevens models 39A 59A 59B and 59C?
The model 39A had a cast trigger guard and the front screw holds the receiver to the stock. The models 59's all have a stamped trigger guard that is held in place with wood screws. The take-down screw is in front of the trigger guard. The model 59B has a black forend tip.
What is the value of Browning Model 81 lever action rifle with gold trigger?
Depending on condition, 250-750 USD.
What is the value on a savage gold trigger model 30e in good c?
Between 120-180 dollars in the condition that you describe.
