0
What else can I help you with?
Why is sand filter blowing green back into pool?
because it is broken
What animal has long eyelashes and ear lines that block blowing sand?
camel
If you have replaced the laterals in your filter and still getting sand blow in when you vacuum it?
Perhaps you have used the wrong sand or it is still blowing old sand out of the pipes.
What are the 6 position on your hayward sand filter?
Filter, winter, closed, backwash, rinse, waste
How do you store used pool filter sand in the winter?
Don' know how to store used filter sand, but a good question none the less :)
Why is sand getting in your pool through return lines?
One reason is that you have a Sand Filter and one of the tines is broken
What are the reasons for having sand in your ingound pool besides the filter and having a hole in the liner?
Other than the wind blowing, nothing. If you cannot get rid of sand in your pool, it is most likely a filter issue. If you have a D.E. filter, and all the grids look good, check to make sure the manifold has a good seat. There is also a small "filter" on the top that may have a hole in it, if its crushed that is most likely your culprit. If you have a sand filter then you most likely have a broken lateral (a small line in the bottom of the filter that screens out sand) The only way to check these are to remove the sand and visually inspect all the laterals. Tritonunderwater.com
How do you clean sand and replace sand on jucuzzi filter?
how do you clean jacuzzi sand filter, and replace sand
Difference between slow sand filter and rapid sand filter?
distinguish between slow and rapid sand filter
What has gone wrong if there is Sand in filter?
Nothing if its a sand filter However if sand is coming into the pool from the filter then you may have to replace one ore more laterals in the sand filter as they have worn and are letting sand through to the pool,
What causes sand to back up in pool through the jets when the pump is running?
If you are getting sand blowing into the pool through the returns You have a problem with the radials in the sand filter. this will require removing the multiport system from the top of the unit . removing the sand, and replacing the worn radials. Get advice from your pool shop.
Why is sand filter blowing algae back in pool while vacuuming?
Im not an expert by any means but what I know is that with a sand filter system if your pump is not the corect HP for the filter it will push dibris and sand right back into the pool answer:: That may be true in remote cases where the system was not installed correctly or had well balanced/matched equipment. The correct answer would most likely be that you have a broken lateral(s) which allow sand to pass back to the pool. It is best to find the correct type lateral for your specific filter. Some manufacturers have made modifications to same model filters as production and technology progresses. Replacing the lateral required turning the equipment off and making sure it will not come back on while it is being worked on. Removing the filter top or valve assy. Removing all sand, finding the damaged lateral(s), replacing lateral, replacing the sand with new sand in the correct manner, replacing the valve or filter top and starting the equipment and backwashing the filter to reduce the dust blow back K
