answersLogoWhite

0

this is usually not a good idea due to a lack of surface area, filtration, and heating. however, you could use a clean 2 liter bottle and put in gravel and an airstone. this would allow you to grow a java fern or anubias in parcial light, as well as maybe keeping a ghost shrimp usually used as live food. i am assuming you mean a 2 liter coke bottle. with a neck diameter of an inch, it might be hard to put anything in but gravel and water. however if you were to cut off much of the top you would have better access and surface area. you could just cut ut halfway to make it swing open for maintenence.this way you could install a diy undergravel filter and raise a betta, provided you do regular water changes.

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

What is the bottle for bottle gardens called?

Terrarium. You can use any old glass container with a lid such as an aquarium


Golo is locked in a cave The gate of the cave will open only when there are exacty 6 liters on this handle?

Fill Bottle 7 . . . then use bottle 7 to fill bottle 5 . . Empty bottle 5 and put the remaining two litres from bottle 7 into bottle 5 . . Fill bottle 7 then use bottle 7 to fill bottle 5 . . empty bottle 5 . . Fill bottle 5 with the remaining 4 litres in bottle 7 . . fill bottle 7 and then use bottle 7 to fill bottle 5 . . this will leave you with 6 litres in bottle 7 . . Done and Done lol 2nd solution: step 01.: fill bottle 5 (0;0 >> 0;5) step 02.: put bottle 5 to 7 (0;5 >> 5;0) step 03.: fill bottle 5 (5;0 >> 5;5) step 04.: put bottle 5 to 7 (5;5 >> 7;3) step 05.: empty bottle 7 (7;3 >> 0;3) step 06.: put bottle 5 to 7 (0;3 >> 3;0) step 07.: fill bottle 5 (3;0 >> 3;5) step 08.: put bottle 5 to 7 (3;5 >> 7;1) step 09.: empty bottle 7 (7;1 >> 0;1) step 10.: put bottle 5 to 7 (0;1 >> 1;0) step 11.: fill bottle 5 (1;0 >> 1;5) step 12.: put bottle 5 to 7 (1;5 >> 6;0) Done


Did zendaya really step on a glass bottle?

no its just a TV. show. she didn't really step on a glass bottle.


Zelda majoras mask put eggs in aquarium?

you have to get in about the cinter of the aquariam top and tack out the egg from the bottle.


How can you make a volcano without a water bottle?

To make a volcano without a water bottle it is best to get a kit. I have made one with a really tiny bowl, too, but it doesn't work as well without a bottle of some sort. It is easiest to get a step by step kit to help you with it.


Where do you connect the bomb is big Nate island?

This is what you do with the stink bomb on Poptropica. Step 1: Go into the Science room in the school and click on the potion bottle. Step 2: Underneath the Potion bottle will be a switch. Make the arrow touch the 4. Step 3: Get the yellow and put it in the bottle then blue then you have made the stink bomb. Step 4: Find all the pieces of the comic. (But I forgot where they all are) Step 5: When you have found all of the pieces make the comic P.S to know if you are right or wrong if it saids something in the middle its right. Step 6: Get the bubblegum off the man and chew it in school. Step 7: A ladie will come and put you in the detention room. Step 8: Get the stink bomb out of your bag and the ladie will go away. And there you go Thats correct add me on poptropica im purple wolf :}}


How do you change the water in an aquarium from cold to hot?

Add an aquarium heater. Make sure you choose a heater with the correct wattage for your aquarium's water volume.


How do you make a volcano out of paper mâché from past experience?

* Water bottle * Tape * Water bottle * Tape * Heavy cardboard (2x2 feet) * Newspaper * Liquid starch * Bowl * Paint * Baking Soda * Vinegar * Food Coloring Step 1:Cut the top of the water bottle off. The top edge of the bottle is going to form the top of the volcano so check to see how much or little to cut off the bottle to make the volcano as tall as desired. Step 2:Tape the bottle to the center of the cardboard. Make sure that the bottle is secure since it will be acting as the temporary center of the volcano. Step 3:Create the form of the volcano. Crumple up the newspaper into rolls to make the base form of the volcano and secure it with the tape. Make sure everything is well taped so that it is secure. Step 4:Make the paper mache glue. In the large bowl, mix water and liquid laundry starch to make the paper mache mixture. Use about one cup of water to two cups of starch. Step 5:Tear the newspaper into strips about one inch long. The paper will be overlapped so make sure you have plenty of strips. Step 6:Dip the newspaper strips into the paper mache mixture. Make sure that they are wet completely. Run the paper gently through your fingers to remove the excess liquid. Step 7:Lay the paper mache strips onto the volcano form. Make sure the entire structure and the cardboard are covered. Be sure not to cover the opening to the bottle at the center of the volcano. This is where the lava will erupt. Overlap the paper to make a stronger form and smooth the newspaper from top to bottom gently with your fingers. This is the part kids really love. Step 8:Wait for the paper mache to dry completely. This should take only a few hours. Step 9:Decorate your volcano with the paint. Any materials can be used to make the volcano unique. Use DIET COLA and when your ready one MENTO'S MENT!!!!


How can you make bottle cap magnets?

I used to love making crafts from bottle caps with my friends and presenting them to my parents. The way I learned it was very simple. Things you need: 1 Bottle Cap Magazine Scissors Glitter Glue Varnish Magnet Elmers Glue Step 1: Get a nickel and place it over a picture or magazine and trace it with a pen. Cut the image out. Step 2: Get some glitter glue and cover the bottom part of the bottle cap until the bottom cannot be seen. Don't put too much! Step 3: Place the picture gently onto the glitter and wait for it to dry. Step 4: When dry, paint a thin layer of Elmers Glue over the picture to protect it against the varnish in the next step. Step 5: Pour varnish over the picture until it reaches the brim of the bottle cap and wait for it to dry. It can take up to 4 days to dry, depending on how much varnish you put on it. Step 6: When the varnish dries, take a magnet and glue to the bottom of the bottle cap. Enjoy!


How can one build a bottle rocket?

A bottle rocket is easily made from two 2-liter plastic bottles, some string such as dental floss, duct tape, garbage bags, cardboard and a tennis ball. There are many simple, brief instructional videos available on YouTube that demonstrate the techniques used to make these rockets step by step.


What was the first aquarium called?

The first aquarium is widely considered to be the "Aquarium" established by Philip Henry Gosse in London in 1853. It was a glass tank designed to showcase marine life and was influential in popularizing the concept of keeping fish in a controlled environment. Gosse's aquarium was a significant step in the development of modern aquariums and contributed to the study of aquatic biology.


How do you make a plastic bottle boat?

you get a plastic bottle