0
1998 Acura CL 2.3 cylinder 1 cylinder 4 and all cylinders misfire misfire code how do you fix this I tried the coil pack ignition module wires plugs with no luck?
Wiki User
∙ 13y ago
There is a good chance the hose leading to the EGR is leaking or has collapsed
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
What could be the cause of a Random cylinder misfire?
Many possibilities. Plugs, plug wires, coil, ignition module, fuel injector, head gasket. Essentially anything that interfers with combustion on 2 or more cylinders.
2003 Cavalier ODBII P0300?
Trouble code P0300 means: Multiple Cylinder Misfire Detected Needs coil pack and/or ignition control module.
Code saying cylinder 1 misfire also misfire in first 1000 revolutions you have changed the coil and all plugs?
Misfire Answer Faulty: spark plug, spark plug wire, ignition coil, ignition module, fuel injector are the most common. Coolant leaking into a cylinder is another. Internal engine problems such as burnt valve, broken valve spring, bent push rod, worn rings
Random misfire on all cylinders on a 2002 Chevy cavalier?
This just happenned to me. I was getting a code PO300. It turned out to be the ignition control module. It cost 78.00 at autozone and only took 10 minutes to replace.
How can you diagnose an car engine misfire?
Misfire Faulty: spark plug, spark plug wire, ignition coil, ignition module, fuel injector are the most common. Coolant leaking into a cylinder is another. Internal engine problems such as burnt valve, broken valve spring, bent push rod, worn rings
Have a 2000 ford explorer xlt engine light came on had it scanned got code po301what do you do next?
PO301- Cylinder One misfire could be a bad plug or wire if not that, then coil or ignition module
Does the ignition module cause misfire when hot on a ford f150?
did you changed your thermostat? You MUST keep around 195 degree thermostat in the vehicle at ALL TIMES due to the computer system. The ignition module usually gets hot due to corroded electrical connections at the ignition module and or the module is HEAT SENSITIVE and needs to be replaced. (plug wires) Ignition misfire can produce a variety of driveability symptoms including hard starting, rough idle, hesitation....
You just replaced your spark plugs and coils on your 2000 kia sportage now you have a misfire on cylinders number2 and 4 what can cause this?
Faulty: spark plug, spark plug wire, ignition coil, ignition module, fuel injector are the most common. Coolant leaking into a cylinder is another. Internal engine problems such as burnt valve, broken valve spring, bent push rod, worn rings
In a computer-controlled ignition system the ignition module does what?
The ignition control module acts like the coil and sends the sparks to the correct cylinder when the computer tells it to.
What would cause cylinder misfire?
Faulty: spark plug, spark plug wire, ignition coil, ignition module, fuel injector are the most common. Coolant leaking into a cylinder is another. Internal engine problems such as burnt valve, broken valve spring, bent push rod, worn rings
What causes misfire in cylinder 2?
Faulty: spark plug, spark plug wire, ignition coil, ignition module, fuel injector are the most common. Coolant leaking into a cylinder is another. Internal engine problems such as burnt valve, broken valve spring, bent push rod, worn rings
What could cause cylinder misfire?
Faulty: spark plug, spark plug wire, ignition coil, ignition module, fuel injector are the most common. Coolant leaking into a cylinder is another. Internal engine problems such as burnt valve, broken valve spring, bent push rod, worn rings
