Only one bit is being sent at a time, so your data bus can be as small as a single trace/wire. However, on the flip side, your data is only being sent one bit at a time, leading to slower transmission, as well more complicated timing of signals.
First, serial network can be extended over long distances at much less cost .
Second, using only one physical wire meanse that there is never a timing problem caused by one wire being slightly longer than anther.
Serial access, also known as sequential access, are usually much cheaper to produce. This also makes it possible to get more data capacity given both a set price and a set physical limit.
Hope that's okay. (:
The speed that the data can travel at.
A serial connection is used to connect one router to another in a network.
In serial verses parallel, Serial only require 2 wires, so is cheaper and easier to use.
There wouldn't be any danger of missing anything out during the batch processing
Hope it helps ;)
The main advantage is that it's very easy to step alternating current up or down in voltage by the use of a transformer. High voltage is preferred for long distance transmission because it cuts transmission loss.
The advantage of having a series compensated line is that it corrects for undervoltages created when a line is overloaded and acts as an inductive element. To compensate for this a series capacitor is added to produce the extra Vars being absorbed by the overloaded line. This will create a smoother voltage profile across the transmission line.
In a transmission line, voltage is stepped up to a very high value. This is so as to take advantage of lower line current and smaller conductor size. At these potentials1, however, like charges repel, so most of the current flow is along the skin of the conductor. Stranded conductors, even wound wire over insulating rope, is more efficient, and more cost effective, than solid conductors.--------------------------------------------------------------------------------------------------1 Actually, this effect occurs at any voltage, but it is most notable at the very high voltages used in power line transmission systems.AnswerStranded conductors are used because of their flexibility compared with solid conductors. Normally, transmission lines consist of a steel-wire core (which provides strength) around which are wound stranded aluminium conductors.
GPIB (general purpose interface bus) is a parallel port device. it can transmit more than one bit at a time. it is faster than rs 232 port. which is a serial port can transmit one bit at a time.the only disadvantage of GPIB or parallel port is it require more transmission bit so its transmission distance reduces.
We need these interconnections because apart from delivery, the purpose of the transmission network is to pool power plants and load centers in order to minimize the total power generation capacity and fuel cost. Transmission interconnections enable taking advantage of diversity of loads , availability of sources and fuel price in order to supply electricity to the loads at minimum cost with a required reliability.
The serial number of your 350 Turbo transmission can be found on the transmission. The transmission should have a specification tag. The tag should be on top of the transmission.
with the serial number , any driveline shop will be ablle to identify the transmission
synchronous serial transmission
Automatic transmission serial numbers are found on the front of the housing. It will be displayed on a barcode that will be inlayed on the transmission housing.
serial and parellel transmission
The transmission serial number on a Honda Odyssey is located on the side of the transmission stamped on a tag. This is important when ordering replacement parts or completing repairs.
big advantage of parallel transmission is the factor of speed. All else being equal, parallel transmission can increase the transfer speed by a factor of n over a serial transmission. But there is also a very significant disadvantage of parallel transmission. And that is the factor of cost. It can be proved from the fact that the parallel transmission requires 'n'
Serial transmission is a method of transmitting data where one bit is transmitted after another in a single wire. Serial transmission is usually used to transmit data between two computers as it is less expensive, yet at a cost of a slightly slow speed. A minimum of two wires is needed for serial transmission, which is less compared to a minimum of eight wires in parallel transmission. Serial transmission is used to send data over long distances as the bits are less likely to get out of order. It is used in devices such as modems, bar code readers and light pens .
the serial number is in the pan for automatic trans, and it is in the bell houseing for the manual.
The advantage of a six speed manual transmission over a automatic transmission is you control the shifting. Now this can be a good or bad thing. It depends on how exprienced you are at driving and how well you know your car. Another advantage is that when you are driving or racing on a track you have another gear to go unlike other cars.
If it is the original transmission the dealer should be able to provide you with this information from the vin.
better gas mileage