on a 2.5l it is mounted on the intake plennum in the back against the firewall
The EGR valve is mounted on the rear of the engine. It is connected to two pipes, just above the bell housing.
EGI.. do you mean EGR?
It's behind the manifold on the driver side
You need to take the intake manifold off and radiator
Start and stall out, possibly. Not start at all, not likely.
see link for pic of a Chrysler egr valve.
The egr valve on a Chrysler Pacifica is on the front of the engine. It is near the top, behind the water pump.
I've just cleaned the EGR valve on my 1999 Sebring Convertible. The EGR valve is over by the battery. Look from the front for something that resembles a thermostat.Old AnswerI have a 98 lxi V6. I believe the 3.0 liter is layed out in the same fashion. If it is, the valve is attached to the back of the intake plenum(the big silver thing that looks like 6 tubes stuck together) between the plenum and the firewall. Go to an autoparts store and buy a manual for the sebring. The directions are in there. That is how I did it. Hope this helps.
please Where is the location egr valve in vw 1.8 engine?
Where is the location of the EGR valve on a 1997 Mercury Mountaineer V*
The EGR valve is on the front passenger side corner of the engine.
It measures how far open the EGR valve is. It is built on the valve.