0
Dial-up ISDN does not convert a computer's digital signals to analog before transmitting them over the PSTN?
Wiki User
∙ 11y ago
True, dawg.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
Which device in pstn willl convert analog to digital?
You would utilize a VoIP adapter in the conversion of analog voice signals into digital IP packets. These adapters also have the ability to convert digital IP packets into analog voice streams.
Does a mixer convert analog signals to digital signals?
No, it just combines the selected inputs to form a single output.There are now both analog and digital mixers, but on a mixer of a given type whatever signal type goes in comes out.You need a converter to convert signal types.
Where would you find digital to analog in the computer?
You would find a digital to analog conversion taking place when you have a monitor with a VGA connection plugged into the computer. The computer would then have to convert digital signals into analog signals so the monitor could comprehend the data it is given.
Which device is used to convert analog signals to digital signals?
In datacommunications this is a modulator/demodulator, commonly known as a modem. In electronics a digital to analog converter (DAC) chip is used to convert digital signals to analog and an analog to digital converter (ADC) chip to convert analog signals to digital. Some chips are available which include both ADC and DAC functionality. There are thousands of different types of DAC and ADC sytems and which one to use largely depends on how fast you want to do the conversion.
What converts digital signals into analog signals for use with IDSN?
it is an DAC (Digital to analogue converter
Dial-up ISDN does not convert a computers digital signals to analog before transmitting them over the PSTN?
True
What is needed to convert digital signals to analog signals?
DAC
Computers send and receive data in the form of signals?
Computers_send_and_receive_data_in_the_form_of_signals
What telecommunications hardware is needed to convert digital signals to anolog signals?
A Demodulator (MODEM)
The device that reconciles the difference between computers and phones is the a.TcpIp b.LAN c.Wand reader d.Modem?
d. Modem It modulates digital signals to analogue signals and demodulates analogue signals back to digital signals.
What is the price of Qwest Modem?
Modem actually stands for modulator-demodulator. Modems allow computers to communicate. They convert digital signals from computers to analog signals that can be carried by telephone systems. Prices of Qwest modems vary by model. The Actiontec M1000 DSL retails for approximately $100.
What are acctuators?
Acctuators are devices used to convert digital signals to movement
What is a modems purpose?
1. To MODULATE (convert) the digital signals from a computer into analogue signal to enable it to be carried through the telephone line. 2. To DEMODULATE (convert back) analogue signals from a telephone line into digital signal to be used in computer.
Which device is used to convert digital signals to analog signals or analog signals to digital signals?
The set top box that your provider gives you is what converts the Digital signal to the analog signal. The digital signal is compressed at the provider and sent to the end user. The "tuner" (which can be built into a tv, a set top box or a cable card) Then decompresses the digital signal and converts it into an analog signal. There is much more to this did not know how technical you wanted your answer.
What is the transfer of digital or analog data using digital or analog signals?
The transfer of digital or analog data using digital or analog signals refers to the process of transmitting information from one device to another, either through digital signals or analog signals. Digital signals are electronic signals that represent binary data, while analog signals are continuous signals that represent continuous data. The method of transfer depends on the type of data being transmitted and the technology being used for the transfer. For example, digital data can be transferred using digital signals through a computer network, while analog data can be transferred using analog signals through a telephone line. Regardless of the method used, the goal of the transfer is to accurately transmit the information from one location to another.
What is the digital switchover used for?
A digital switchover is used to convert television signals that are designed for old tvs so that they will still function on advanced digital televisions.
Is a speaker input device?
No, it is an output device. It outputs sound waves.
