NO you do not. It has a 1 piece solid round rear main seal that slides over the back of the crankshaft. You can either pull the transmission are engine out to replace the seal.
Theres no other way.
Raw/unburned fuel? Carb. may need adjustment? Needle/ seat valve need replacement?
No.... You need to change the whole back tail piece
check the brake light switch by the pedal. it might be kind of underneith the dash it might just need to adjusted
Yes, but you will need to change the prom in the computer and you may need to make adjustments to the fuel system to compensate for the larger fuel injectors.
yes it will fit may have diffrent window trim and you will have to use your door panel if it is a front door you will have to change mirror also u will need to change your handle your 91 should be chrome
To change the brake pads on a 1991 Chevrolet Caprice, you will need some tools. You're going to need a c-clamp, a hex key or Allen wrench to remove the calipers, and a wrench to bleed the lines.
Need a little more information: After-market or factory stereo? Are you doing speakers as well? Do you know if any wiring will need repair?
we need to change out the thermostat on a 1996 VW 2.4 diesel engine Transporter and we need the schematic for it; where is the darned thing and how do you get it out to change it
Its possible you may need a new spark plug...
There's no need to change it if it's not broken.
Could be in need of a serious tune up.
We need to know which gauge stopped working.