Yes
on the mower deck
How do you change a mower deck belt on a John Deere L130?Read more: How_do_you_change_a_mower_deck_belt_on_a_John_Deere_L130
john deere LT155 38inch cut mower deck
The deck must be slipped beneath the machine from the left, the lift lever locked down and the rear hangers and front hanger plate attached. The belt will take take a 90 degree twist with the front part to the left side.
38'' deck
anonymously
How is the belt position on the front 48" deck on a JD F525
lift the yoke gaurd door and make sure that the front yoke is turned so that the split side is up, then pull the rotator handle. the deck will then drop. then make sure that the mower deck is at the lowest position. go to the front of the mower deck and lift by the two handles until it locks in place. the locking pin is on the left side as you face the mower from the front. be prepared it weighs about 175 lbs. these instructions apply to the 60" deck. good luck.
need a diagram for the belt on my L120 lawn mower
Yes it will fit.
The John Deere 48 mower deck belt pattern diagram can be obtained from most John Deere dealerships. Many times when you purchase the belt the parts store will give you a belt pattern diagram.
The front snowblower attachment on the GT225 is powered by the engine through a belt that extends to the pulley on the bottom of the engine. ( it is the same pulley that drives the mower deck.) The mower deck must be removed. Bret