With a helper, pump the brake pedal several times then hold it down. With the pedal down, loosen the bleeder valve on one caliper until the fluid runs. When the pedal gets to the floor, close the valve and repeat the process. When no air comes out with the fluid, repeat for the remaining three wheels.
form_title= Ford F150 Brakes form_header= Drive safely with new brakes. When was the last time your brakes have been replaced?*= _ [50] Have you noticed any issues?*= () Yes () No Do you have to press hard on the brakes?*= () Yes () No
how to replace an oil pan that goes to a ford f150 1993? how much does the pan cost,and can you show a picture of it?
bleed it the same way u bleed the brakes
Disc brakes at the top of the caliper Drum brakes at the top of the wheel cylinder
With years of experiance
Yes.
There is no OBDII connector on 1993 F150. Didn't start until 1996 (97 model).
The type of vehicle is not important, but if brake pressure is failing, you need to bleed ALL the brakes.
Either your brakes are sticking or they are adjusted to much.
What question
You have drum brakes on the rear.
no