It is just the sum of all hours of availability divided by the total hours of a month. i.e. For December the quantity of hours of service was about 700hrs and the total hours for this month 744; so the availability factor is 700/744=0.94; in other words 94%
if the donor consecration ( nd )is much larger than the intrinsic concentration( ni )then n0=nd when n0 is the thermal equilibrium concentration of free electron so : nopo=ni2 (when p0 is the thermal equilibrium concentration of holes ) po=ni2/nd do some basic math we got nd=ni2/po
Electronics are used in thermal power plants when the power from the thermal power plants are transferred to a storage source. There, electronics comes in.
A device that converts electric energy into thermal energy. A device that regulates the temperature of a system. A device that uses electric energy to transfer thermal energy from a cooler location to a warmer location. A machine that converts thermal energy into mechanical energy.
Hydroelectric energy uses water. Thermal energy uses heat. Simple Science! Duh!
MCB (Miniature Circuit Breaker)-rated current not more than 100 A. Trip characteristics normally not adjustable. Thermal or thermal-magnetic operation. Breakers illustrated above are in this category.MCCB (Molded Case Circuit Breaker)-rated current up to 2500 A. Thermal or thermal-magnetic operation. Trip current may be adjustable in larger ratings. MCB (Miniature Circuit Breaker)-rated current not more than 100 A. Trip characteristics normally not adjustable. Thermal or thermal-magnetic operation. Breakers illustrated above are in this category.MCCB (Molded Case Circuit Breaker)-rated current up to 2500 A. Thermal or thermal-magnetic operation. Trip current may be adjustable in larger ratings.from Manu anand
deemed generation means means the energy which a thermal power generating station was capable of generating but could not generate due to reasons beyond the control of the generating station or on account of non-availability of Transmission Licensee's transmission lines or on receipt of backing down instructions from the State Load Dispatch Centre resulting in shortage of various fossil fuel such as coal n all...
100 percent of the electricity generated in Niger is produced in thermal generating plants using fossil fuels.
There are multiple methods used in electric energy generation. These include hydroelectric, wind, solar, nuclear, geothermal and thermal generating technologies.
Thermal energy can be used in generating electricityNon-polluting, so doesn't cause global warming.Free, renewable and never-ending
no
Dams and windmills. and midget on a tredmill with a pair of platform shoes dangleing in front of it
Because thermal pollution increases water temperature, so decreasing oxygen availability for the organisms in the lake.
Thermal energy because you are using heat. The thermal energy can be supplied by an external heat source or by electric it generating microwaves which excite the water molecules to produce heat.
You would need to calculate, or estimate, the thermal energy.
Yes. It can - and sometimes is - used to generate electricity. For more information, check the Wikipedia article on "Geothermal energy".
Heat converts water into steam generating enough pressure to drive a turbine mechanically attached to an electric generator.
Generating Energy through Coal i.e, Thermal Energy is costlier as comparer t Hydro energy generation.BUt the Installation cost in case of Hydro Power Plant is much higher than the thermal Pwr Plant