Depends on the sort of damage. If its just the actual mirror tahts smashed then u can get a mirror to just stick on top from halfords. But if the mirror unit is broken then you will be better off getting a new one, either from Peugeot (£££), eBay or a breakers yard.
To remove the mirror:
-remove the rubber cap from the end of the control lever inside the car
- undo and remove circular locknut from the control lever assembly using thin nose pliers or similar
- prise off the corner trims inside using a flat blade screwdriver, these are surprisingly tightly fitted, and have three locating dowels, two both below and to the left and right of the control lever assembly, and one directly above
- undo and remove 3 (Allen) screws, while supporting the mirror from the outside.
- withdraw mirror and corner assy
take facing plate off on the inside were you adjust and there shuld be screws!
+++might have to take the door pannel off because i think 1 of the screws are behind it :P
Need more information. Too general a question.
Need to check if it getting power, if it is... the mirror needs replacing.
i could go through it for you but you could go and buy a haynes manual that will tell and show you exactly how to overall your brakes
check fuse for cooling fan, or possibly temperature sensor at inlet.
how to fix belt for peugeot 207 diesel
To fix a mirror u need to get out of the picture before it breaks even more:)
how do you fix a chipped mirrore
it depends
why does my heating not work in peugeot partner van year 2000?
Trade it in for a Volvo. Or a BMW. Or a Ford. Anything but a Peugeot. I guarantee you this will not be the last thing you fix.
If a moth broken a wing they can't fly right you can't really fix or do something because it is hard th fix it what they do is really to crawl or flap there one wing at the same time
The proper way is to buy another mirror and replace it. If that is not possible purchase weatherstrip adhesive, comes in a tape form. As long as the peices are still there you should be able to attach with this tape. If you use the tape temperature for adhesion must be observed or it will not hold also mirror needs to be secured for a day or so for the tape to set. The proper way is to replace the mirror but this worked for me in a fix.