Pop the hood there is a pin (metal rod L shaped around 1 in on the short side and 6 inches on the long side) that is above the headlight assembly remove the pin and the assembly will essentially fall out, change bulb, replace the assembly and put the pin back in.
2000 Chevy Silverado LT Ext Cab 4 dr 5.3L 4x4 Z71 Driver
Begin by removing the wiring harness from the back of your 1989 Silverado headlight assembly. Remove the low beam headlight assembly retaining bolts. Reverse the process to install your new low beam headlight.
how do you change front headlight bulb on 2000 volkswagon cabrio
Open the hood and on the top of the headlight assembly there should be two pins. Turn them so they face the front of the truck and pull them up and out. Now you should be able to pull the whole headlight assembly out. Turn the ring on the back of the headlight ,unplug it and pull the headlight out. Install in reverse order.
Remove the headlight assembly to gain access to the bulbs.
I used 800, 1000, 2000 sandpaper then buffed with rubbing compound.
Remove the headlight assembly to gain access to the bulbs.
There will be a blote on the in side headlight
how to change oil pump in a 2000 Chevy silverado 4.3 2 wheel drive truck
For the 1994 model (B3000), you can't change just the bulb. You have to change the headlight assembly.
== ==
how do i repace the headlight sencor in the dash of a 2004 silverado
How do I remove the headlight unit on a V6 TDI Passat year 2000?