Find the idler pully of the serpentine belt system. It is usually the one that appears to not "drive" any system and is normally located towards the top of the other pullys. On the idler pully assembly, you will find a bolt (not the bolt in center of pully or the one at the pivot point of assembly). Using the correct sized socket and a large ratchet (or wrench) as a lever, pull or push the idler pully assembly, which is spring tensioned, until the pully moves in far enough to get new belt on. Slowly release tension until belt is tight against the idler pully under the assembly's spring tension. Be sure belt is properly seated on all pullys without any twists.
It has been a awhile and I had the dealership do it. I belive that they had to remove the radiator.
i need diagrama for serpentine belt for 2000 aurora
This might be helpfful. How do you Change a fan belt on 94 prizm?
There should be a diagram of the belt's routing somewhere under the hood. There is on my Aurora.
It runs off the serpentine belt - one belt for everything.
How do you change a serpentine belt on 2006 Envoy
There is a special tool I saw in a pawn shop that is just for that.
This is the escort forum not the E 150 forum.
how do you change serpentine belt gm 3.4 2003 venture
How Do I change the serpentine belt on a 1989 Cadillac Eldorado ?
You can get a serpentine belt diagram for your 1995 Eagle Talon at most Chrysler dealerships. Most auto-parts stores will give you a diagram when you purchase the serpentine belt.
Turn the Tensioner bolt clockwise (to the right)and the tensioner itself will move causing slack in the belt.