To disable the seat belt warning system; you must follow the procedure listed under safety restraints. It is on page 88-91 in my manual and involves a whole list of things you have to do while the ignition system is turned to the on position but without the car running.
plug the seatbelt in.. the warning stops then ;-)
I was told that in the Expedition 2004 you can push the belt release button when the chime is going off and that stops it until the door is opened the engine is turned off. Good Luck
How do I disable seat belt alarm for a Ford F150 2004
clips the purple wires in the back of the radio
If you are talking about when you are parked, my 2006 Forrester will stop beeping at you if you buckly your seat belt then unbuckle it. The warning does not come back on
2004 Lincoln town car belt diagram
i have 98 prizm lsi, same problem. just pull the seat belt a little farther the warning light should go off.
there should be a plug in under your drivers seat drive safe
connect the 2 active wires at the seat belt receptal, (the thing you plug the seat belt into!!! )
Look in you owners manual for enhanced warning system. The instructions are there. Other than that, wear your seat belt, it is the law.
You can disable the seatbelt warning chime, in your Honda CRV, by removing the fuse. The fuse can be found in the fuse box in the engine compartment.
It has a cam belt that MUST be replaced every 100,000 miles. Warning: This is an interference engine.