silicon caulk will glue wood and marble. clamp it, give it plenty of time to dry, and assuming its not some structural joint, it should last for ever.
PL Premium and silicone both work well on marble.
see related link,
An epoxy like J B Weld or Araldite is best for this use.
J B Weld or PL Premium is good on that application.
I would use 100% silicone for that.
Epoxy would be best.
Silicone is the best glue for marble.
Epoxy .
An epoxy.
use super strong glue and then use fill (from b&q) and it should stay :)
Use epoxy and clamp it for at least 4 hours.
You can glue it back on, but don't use rubber cement. Most model glues will work fine and even better is super glue!
Polyurethane construction adhesive like Sikabond Construction Adhesive will glue cork to marble. You could also use a hot glue gun.
Use glue that use made for pottery and follow the instructions on the glue.
you need super glue
Use glue
Use a good marble shining powder all over the area.
Cut it off with a chainsaw then when finished, glue back on with one piece of gum. What? It's true! (If you want a broken mirror.) Improvement- u can use 2 pieces of gum or alternatively glue
Don't the CD is obviously broken and cant be fixed
Put some glue on the piece you want to join and clamp the other piece to it. Leave it clamped for 4 hours
Unless it is in a place where you can glue it and it will not be noticable I would try to replace it. If you have the piece you can use a plastic welder to repair it.