Get a nut that fits the threads on the O2 sensor, or cut the socket out of the old header and drill a hole in the new header in about the same place as the old one, weld the nut or socket over the hole and attach the O2 sensor.
un bolt the old header and bolt the new one on . dont forget the gasket
Disconnect the battery. On the side of the throttle body, disconnect the wiring from the position sensor. Remove the bolts from the sensor, and lift the sensor off, reverse the procedure to install the new one.
Screew it out, and screew the new 1 in.
Remove the vacuum hose from the sensor. Remove the sensor retaining screws. The sensor will come off. Reverse the process to install the new sensor.
A crankshaft sensor, on a Hyundai XG350, can be installed by simply plugging the new sensor into the slot of the old sensor. The sensor can be located on the back of the engine cover.
install a new one!!
pull the wire off of it and then get your wrench or socket and unbolt the sensor and install the new one.
Remove the oxygen sensor vacuum to. Remove the oxygen sensor screws. Reverse the process to install the new oxygen sensor.
Remove the wiring harness from your speed sensor. Remove the speed sensor retaining bolts. Reverse the process to install your new speed sensor.
Very simple. Unplug the wire to the sensor, unscrew/remove the sensor, install new sensor and plug it in. You're done. Have fun.
Remove the vacuum hose from the oxygen sensor. Remove the oxygen sensor retaining screws. Reverse the process to install the new oxygen sensor.
Remove the wiring harness from the EGR temperature sensor. Remove the two retaining screws from the sensor. Reverse the process to install the new sensor.