answersLogoWhite

0


Best Answer

well, you pull the wheel out, you see a little screw on the brakedrum, you take it oul, then you need two bigger screws M8, you put them into the two holes you see. by screwing them, you will be able to take the brakedrum off. take the new one, put it back on, put the little screw back on, put the wheel back on and don`t forget to make sure it`s tight

User Avatar

Wiki User

14y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you install the rear brake drums on a 2003 Hyundai Accent?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How are the brake drums and shoes replaced on a 1995 Camry V6?

Remove the wheels from your 1995 Toyota Camry. Remove the brake pads by removing the brake pad Springs. Tap on the brake drum with a hammer or mallet. Slide the brake drums off. Reverse the process to install the new brake drums and shoes.


How do you remove the rear brake drums on a 2003 Hyundai Accent?

THERE IS A THREADED HOLE IN THE DRUM,8MM METRIC I BELEIVE,THREAD THE BOLT IN AND USING A RATCHET TIGHTEN SLOWLY AND THE DRUM WILL POP OFF. JUST MAKE SURE THE PARKING BRAKE IS OFF AND BLOCK THE FRONT TIRES TO PREVENT THE VEHICLE FROM MOVING.


Do brake drums need to be replaced after being saturated with brake fluid?

No, the drums can be cleaned with brake cleaner.No, the drums can be cleaned with brake cleaner.


How do you remove brake drums without a tool?

If you are inexperienced, you should not be messing around with the brake drums.


How long does it take to brake in new brake drums?

New brake drums are broken in the first time you go for a drive usually.


How do you remove the rear brake drums on 1998 Pontiac sunfire?

brake drums should pull off if not rusted on.


How do you turn brake drums on a 1999 Ranger?

Remove the drums and take them to an auto parts store that has a brake drum lathe.


Where is the wheel cylinder located on a 1995 chrysler cirrus?

It is inside the rear brake drums. It is the part that pushes the brake shoes out against the drum.It is inside the rear brake drums. It is the part that pushes the brake shoes out against the drum.


What shops resurface brake drums?

Almost all Auto Parts stores and machine shops resurface rotors and brake drums.


How do you replace rear brake drums for 1999 Chevy Venture?

i was wondering how to change rear brake drums for 1999 Chevy venture


Do new brake drums need to be cut?

Brake drums can not be cut. The shoes inside can be replaced.Only disc brakes(rotors) can cut.


What size brake drums are on your 1993 Ranger 2 wheel drive?

You could have either 9 inch or 10 inch brake drums