0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Why wont starter engage all the time when i turn on the key on a 96 pa?
Could possibly a solenoid on the starter going bad. Could possibly a solenoid on the starter going bad. Could possibly a solenoid on the starter going bad.
How do you know if the solenoid is bad on a Yamaha raptor ATV?
If your solenoid is bad on your atv raptor it will just click when trying to start it
Will shifting solenoid make noise when its going out 2001 pt cruiser?
When a shift solenoid goes bad the solenoid doesn't make any noise.
How do you know if its the starter or solenoid that is broke?
You can turn the key to the "run" position, and jump across the solenoid with a screwdriver or something metal. If the starter turns, you have a bad solenoid.
Intermittent starting 1996 Saturn?
Solenoid going bad remove and replace starter assembly.
What will a bad transmission solenoid do?
A bad transmission solenoid will cause hard shifting and can eventually damage the unit. You should change the solenoid if it is bad.
Why does the 2000 Oldsmobile Intrigue sometimes click under the dash instead of start and it is not a battery problem?
Neutral safety switch going bad? Starter solenoid going bad?
Your 94 Jeep Cherokee has no power going to the coil what would cause this?
bad starter or starter solenoid.
Why does starter click but does not start until after a few tries?
Sounds like starter solenoid is going bad and needs replacing
How do you check the fuel solenoid on Briggs 18 hp ohv engine?
Switch the ignition to on. Put your meter to 12VDc. Touch the hot wire going to the solenoid with the meter positive probe . Touch the meter negative probe to ground. If you have 12VDc and you don't hear a click when you turn on the switch, the solenoid is probably bad. If you don't have 12VDc, check fuses and the wire going to the solenoid.
How do you know if your battery is going bad?
in what
Starting problems with the Casadia Freightliner?
Could be a starter solenoid going bad, it could be ECM problems, it could be a number of things.
