remove road wheel and with a long 5mm Alan key insert straight through the disk until lined up with sensor and remove........hey presto 10mins a side! no need to remove calipers or pads like Peugeot say!
they are connected at the rear of each wheel, and disconneted under the rear passenger seats and then lift flap under carpet and remove plastic lid, and they are both there, you have to lower petrol tank to remove sensor cable, and replace new ones. but i would leave if they are not faulty.
fitting rear bulb peugeot expert van
To change the temperature sensor on a Peugeot 206, look at the underside of the passenger door mirror. There is a small black plastic bump sticking out of a hole in the mirror body. Remove the cover from the rear of the mirror and attach the new sensor.
I need to know how to remove a rear wheel speed sensor on a 2002 Pontiac Sunfire
Where is the rear wheel abs sensor on a 1998 Honda CRV?
Remove the rear tire and wheel. Remove the axle end cap. Remove the rear wheel seal. Remove the rear wheel bearing. Reverse the process to install the new wheel bearing.
Check
TNT
Begin by removing the rear tire and wheel. Remove the end of the axle. Remove the wheel bearing nut. Remove the wheel bearing seal and the wheel bearing.
If vehicle has ABS antilock brake sys then probly a sensor on every wheel There is a speed sensor for the rear located on the rear differential, one sensor for both rear wheels. There are 2 in the front, one for each wheel
It is on the top of the rear axle. You remove the nut that holds the brake line, remove the hold down bolt, and pull sensor out.
Wheel speed or ABS sensor's are located on the suspension Knuckle Front and Rear.