WD40 does all kinds of amazing things...try it. I have an e-mail forward listing all the uses for WD40. I'd be happy to send it to you. Contact me @landon_kirby@Yahoo.com
The easiest way to remove wood stain from windows is to use the gel version of SHOUT (Laundry spot remover). I discovered this when I inadvertently removed the varnish and stain (right down to the white wood) from the foot of my sleigh bed while prepping the clothes. This year we moved into a 100+ year old house. I used the gel shout and q-tips to remove the wood stain from our stain glass windows in our foyer. The job was done w/in 45 min and I didn't need to use a razor blade. There wasn't a spec of wood stain on the windows and they shine! Just make sure you don't get the shout on the wood!
+++
WD-40 might remove certain types of stain - I can't vouch for that - but it will leave an oily smear that will need cleaning off in turn. The initials by the way, stand for "Water Dispersant", its primary function. It will work, sort of, as a short-term lubricant and as a weak easing oil, but those are not its main functions (despite what it says on the tin!), and it can make things worse by washing existing lubricant away. It is good for cleaning oil off paintwork or metalwork but note that it will leave its own thin deposit. I think it's basically paraffin.
Several solvents will work for an oil based stain. Alcohol should work as a solvent. Vinegar will also help to remove it. Dish washing detergent is another solution. Anything that breaks up the oil will work.
A single edge razor blade will do the job very well. You can also find a paint removing tool at the hardware store more very little money which will hold the razor blade for you and allow a safer means of scraping the paint away.
Use Mineral Spirits or Paint Thinner. Test an area first but should work just fine.
You can't, best to just stain both lenses cometely and shamwow - you've got persription sunnys!
Use a razor blade when it is dry. You can try thinner, but be aware that thinner can cloud some glass. Fingernail polish remover can work too. But, the razor is your best solution.
No, it will not lighten stain, just add another layer. The only way I have ever been able to lighten stain is to sand it off carefully.
All of it. Otherwise the latex stain will seal the surface of the wood and the oil will not be able to penetrate into the wood. Sanding won't remove all of the residue. You'll want to use a paint stripper/stain remover too.
If you paint over the "weathered" paint, it will chip and cause the stain to come off. Also, the stain needs a clean sanded surface in order for the wood to absorb it. Otherwise, there is no reason to use stain.
Yes, if it's a gel stain. However, if it's a penetrating stain it will not dry correctly. If you try to clean it, it will smear. If you put a clear topcoat on it, the topcoat will smear the excess stain.
you need to wipe the excess stain off the deck with a clean rag. It will never dry and it will float to the top of the sealer
Have the coating removed - It is about $20. If you take them to where you bought them, they may do it for free.
Carefully scrape with a razor blade
There are a few ways one can remove wood stain off of concrete. One way is to use a sandblaster to remove the stains. Another method is using wood bleach, water, and a scrubbing brush.
No, but Goof -Off will.
On what product? Clorox will clean crap out of glasses and off dishes. I think water would take out that product stain,.
No,Any kind of sealer you try to put on after will lift off the dried stain. And the exess stain, even when dry, will rub off on anything that touches it.If you can't get the color dark enough, they do make colored sealers you can spray or brush on.
NGR stain is a stain (the kind found in the paint aisle, not the kind on your shirt) that will not make the wood grain fibers rise up from the surface of the wood. Raised grain may have to be sanded off.
Try Goof -Off .
No, it will not lighten stain, just add another layer. The only way I have ever been able to lighten stain is to sand it off carefully.
All of it. Otherwise the latex stain will seal the surface of the wood and the oil will not be able to penetrate into the wood. Sanding won't remove all of the residue. You'll want to use a paint stripper/stain remover too.
You need glasses to correct your vision. If you can't see far or close distances, glasses help you. They reflect how the image bounces off your eye.
If you paint over the "weathered" paint, it will chip and cause the stain to come off. Also, the stain needs a clean sanded surface in order for the wood to absorb it. Otherwise, there is no reason to use stain.