Caution:On models equipped with Delco-Loc 2 or Theftlock audio systems make sure you have activation code * Disconnect the negative battery cable * Remove the drivebelt on 2.2L engines.Remove the air intake duct from the engine on 2.3L and 2.4L engines * Disconnect the inlet and out hoses from the Power Steering pump * Unbolt the power steering pump from the bracket on 2.2L engines or from the rear of the camshaft housing on 2.3L and 2.4L engines * Remove the pump * On 2.2L engines remove the pulley from the power steering pump with a suitable pulley removal tool * Installation is the reverse of removal.Tighten the pump bolts and fittings securely * Prime the pump by turning the pulley in the reverse direction to that of normal rotation until the air bubbles cease to emerge from the fluid when observed through the reservoir filler cap * Install the drivebelt * Bleed the power steering system
?
the power steering reservoir
Remove the belt from your 1969 Chevy power steering pump. Remove the power steering pump hoses. Remove the power steering pump retaining bolts. Reverse the process to install your new power steering pump.
Remove the belt for am your power steering pump. Remove the power steering pump hose. Remove the power steering pump retaining bolts. Reverse the process to install your new power steering pump.
The 1997 Chevy Cavalier power steering hose is held in place with swivel nuts. Loosen the swivel nuts by turning them to the left. The power steering hose will come off. Reverse the process to install the new power steering hose.
Next to the power steering pump
a light greeny blue
Remove the belt from your 1992 Chevy Lumina power steering pump. Remove the power steering pump hose. Remove the power steering pump retaining bolts. Reverse the process to install the new power steering pump.
Begin by removing the belt from your 1994 Chevy Suburban power steering pump. Remove the power steering pump hose. Remove the power steering pump retaining bolts. The power steering pump will come off.
try www.autozone.com
ABOVE YOUR POWER STEERING RACK LOCATED ON THE FIREWALL
Rear P/S top of engine. A black cap with orange writing that says Power Steering.
remove belt,remove hoses, 3 bolts are accesible through the holes in the pulley, then 1 bolt to the rear of the pump just be patient and weasle it out