start with removing the wheel, then there should be two bolts located on the back of the caliper remove the two bolts and slide the caliper and bracket off all as one. support the brake assembly so its not just dangling by the brake line. then there should be one Phillips head screw in the front of the rotor remove it and slide off the rotor.
All four brake pads and rotors will cost about $510 for a 2007 Hyundai Sonata. Lesser work on the brakes will cost somewhat less.
Same way as the front. First remove the calipers, then remove the two cross-point screws that hold the caliper in place . finally, remove the rotors and replace.
Only if it has rear disk brakes.
The front brakes and rotors on a 92 Hyundai excel need to function properly to insure that the car stops quickly. A front brake problem can cause an accident or personal injury.
Remove the wheel, the calipers and the rotors, reverse procedure with new rotors.
The Hyundai dealership said it would be $680 for replacing all 4 rotors and an additional $300 to replace the brakes! Most aftermarket pads are about $50 per axle. Rotors are usually around $50-75 each.
i have 2006 endeavor changing brakes do i have to remove the two screws in the rotor to remove so i can have resurfaced
Get a manual on your car and do the job right the first time.
If the truck has disc brakes on the rear then the park brake shoes are located inside the rear rotors. You have to remove the brake calipers, pads and rotors to access them
Remove wheels Remove 2 caliper mounting bolts Slide caliper off rotors Rotors should slide off hub Fully retract piston into caliper body using a "C" clamp Replace inner and outer brake pads Re-Install rotors Slide caliper on rotors and re-secure REMEMBER TO PUMP BRAKES TO SET PADS AGAINST ROTORS PRIOR TO MOVING VEHICLE Remove wheels Remove 2 caliper mounting bolts Slide caliper off rotors Rotors should slide off hub Fully retract piston into caliper body using a "C" clamp Replace inner and outer brake pads Re-Install rotors Slide caliper on rotors and re-secure REMEMBER TO PUMP BRAKES TO SET PADS AGAINST ROTORS PRIOR TO MOVING VEHICLE Remove wheels Remove 2 caliper mounting bolts Slide caliper off rotors Rotors should slide off hub Fully retract piston into caliper body using a "C" clamp Replace inner and outer brake pads Re-Install rotors Slide caliper on rotors and re-secure REMEMBER TO PUMP BRAKES TO SET PADS AGAINST ROTORS PRIOR TO MOVING VEHICLE
remove brake seats then remove the brake knuckles , then you'll need a wheel hub puller or a slide hammer.
You don't need to, The disc pads will remove it instantly as soon as brakes are applied.