I tried the dishrag thing and it didn't work for me. The crank on my '97 SC2 is held on by a wire spring shaped like an omega. The top of the omega is located opposite the crank arm and is held up by two little standoffs 1/8 inch apart, so you can get a hook under it and pull it loose. I made a little hook (1/8") on the end of a strip of steel 3/64 X 3/32 inch. It was the backbone out of a discarded windshield wiper. About 1 inch up, I put about a 5 degree bend in it, the same direction as the hook, so that it could have some travel once it got inserted behind the handle. Push the trim panel in a little, slip the hook behind the handle opposite the arm, hook the spring and give it a sharp pull. I had to use pliers. The spring will pop off and roll under the car, so don't do this in the grass.
nope, at the crank
How to remove the wiper motor on a 2002 Saturn sc1
remove the torx screws that hold in place, remove the bulbs from sockets
Remove the instrument cluster then replace the bulbs. = =
The motor is not worth fixing. Go to a junkyard and just get a new one
Remove outer door skin(if you need directions for this try your local library for a service manual)lower window glass remove glass nuts with toolSA9148B push glass up and rotate slightly remove door glass reverse procedure to install glass
There are some very effective metal shears that help you with that.
Yes. The sc1 is a coupe.
The minimum price for a 1995 Saturn SC1 trailing arm is $50.
What does code 1404 mean on 97 saturn sc1
1999 saturn sc1 , need radio code. 4 digit from radio is 1407
my 1995 Saturn sl2 has a factory alarm, my daughters 1997 sc1 also has one