The Chrysler New Yorker has the most common hook-end wiper arms. See sources and related links below for installation videos. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.
Take it to Auto Zone. They will remove them and replace your new ones. IF you buy them there, I suppose.
Remove the wiper arms from the car. Remove bezel (trim piece) under the wiper arms. disconnect the wiper motor from the connector arms and wiring. Remove bolts and the motor should come out. When installing a new motor make sure the motor is at the proper position of its wiping cycle so that the wipers will start and stop at the proper place on your windshield.
The front wiper arms on a 1997 Mercury Villager clip off once they are bent backwards. To install the new wipers simply slide them into the clip.
Assuming this is a Town Car, remove the wiper arms and plastic cowl molding. Lift the filter out, and put a new one in it's place. Replace the molding and wiper arms.
Refer to your user and service manual to see how you can remove a radiator from a 1995 Chrysler New Yorker.
To replace a wiper motor on a 1994 Toyota Corolla, remove the rubber stopper that cover the hardware attached to the wiper arms. Then grab the wiper arm and jiggle it back and forth until it comes off. Remove the old one and slip the new one on.
Remove the wiper arm from the wiper motor. Remove the wiring harness from the wiper motor. Remove the wiper motor retaining bolts. Reverse the process to install the new wiper motor.
Remove the wiper arm from the wiper motor. Remove the wiring harness. Remove the wiper motor retaining bolts. Reverse the process to install the new wiper motor.
Remove the wiring harness from the wiper motor. Remove the windshield wiper arm from the wiper motor. Remove the wiper motor retaining screws. Reverse the process to install the new wiper motor.
Remove the rear wiper arm from the wiper motor. Remove the wiring harness from the wiper motor. Remove the wiper motor retaining bolts. Reverse the process to install the new wiper motor.
Remove the wiring harness from the wiper motor. Remove the wiper arm linkage. Remove the wiper motor retaining bolts. Reverse the process to install the new wiper motor.
Remove the wiper arm from your 1999 Oldsmobile Cutlass wiper motor. Remove the wiper motor wiring harness. Remove the wiper motor retaining bolts. Reverse the process to install the new wiper motor.