0
How do you remove wood stain from fiberglass shower floors with a matte finish?
Lashbauer
I don't know about fiberglass but I got wood stain on my nearly-white carpet and it came right up using hydrogen peroxide. It didn't bleach out the carpet either! Hope that helps.
Wiki User
∙ 18y ago
Add your answer:
Earn +20 pts
Can you tile a fiberglass shower curb I am having a glass door and pane installed and discovered that the fiberglass is stained and would show under the door I have left over tile?
You can if you use a tile glue suitable to the fibreglass. Read the instructions on your adhesive carefully, many will stick to fibreglass,but some won't.
What can you use for cleaning the hard water spot on the glass shower door?
Greased Lightning.White vinegar has been tried and tested as a method to remove hard water spots from shower doors. See the step by step method below...Natural Formula to Use:Pure white vinegarMethod to Use:1.Fill a clean spray bottle with pure vinegar2.Spray the vinegar freely over the shower door and wait for a few minutes3.If stains are stubborn spray more vinegar and wait a while longer4.Scrub lightly with a soft sponge or cloth and rinseorInexpensive toothpaste works great to clean shower doors, the least expensive brand you can find will work. Squeeze it out of the tube and work it onto the shower doors with a scrubbing style sponge, fully rinse to finish. Sparkling shower doors is the end result!
You recently painted a bathroom using Benjamin Moore Regal paint in a pearl finish you noticed that there where streaks after the shower and the paint is sticky you have been told you stressed the pai?
The paint was not fully cured when you used the shower. Now it will not dry until you stop using the shower for an extended time. Your option is to prime with a water based primer, allow to dry fully, coat with a eggshell or better coat, allow to dry fully, then recoat. Then allow to dry fully prior to using the shower.
What does a bathroom extractor fan do?
It is meant to remove the moisture or humidity in the air after a shower. This keeps mildew from forming. It also removes any unwanted odors.
What is a shower dance?
Simply dancing while taking a shower is called shower dance :)
What is the cost to install a fiberglass shower?
what is the cost to install a fiberglass shower
Where can one purchase fiberglass shower stalls?
Fiberglass shower stalls are available for purchase at most home improvement stores. Home Depot and Lowe's should both have these shower stalls in stock.
What can you use on fiberglass shower stalls to prevent water spotting?
Assuming it has gelcoat finish,clean it a couple of times with acetone and clean rags to remove soap scum and body fats. If desired, it can then be polished with a cutting compound. finally, wax it with a mould release wax or car polish.
Shower Fixtures ?
form_title= Shower Fixtures form_header= Install new fixtures in your home What finish do you want on your fixtures?*= _ [50] Do you need to remove existing fixtures?*= () Yes () No What type of shower do you have?*= _ [50]
How do you remove super glue from a fiberglass shower enclosure without damaging the fiberglass?
removing superglue can be tough. first up, make sure the shower surface is gelcoat. if it is then it's safe to use acetone to clean the superglue from the surface. test it with a rag damped with acetone in an inconspicuous area to be sure before you attack the superglue area.
Is fiberglass fireproof?
if you are referring to fiberglass insulation, in modst cases it is. Fiberglass tubs and shower inserts are not. I have read where they are fire resistant but in reality they burn very nice. Fiberglass is not flammable but the epoxy used to bind it together is.
Installing A Shower Unit?
How to install a shower unitHomeowners who want to install a shower in their home can do the job themselves instead of having to pay someone to do it. Find the materials that you need to complete the shower. You will need the base for the shower, the shower door, fiberglass for the shower itself, and the attachments. Begin by building the base of the shower. Make the base tall enough to keep the water off the floor, but low enough so you can easily step over the edge to get in the shower. Construct the frame of the shower from the wood and then add the fiberglass to the wooden frame. Use caution when using fiberglass because you can get the small glass particles in your hands.Make a door frame that will house the shower door. When you finish with the frame, carefully slide the glass form the packaging into the frame. Use brackets to attach the hinges so that the door will open and shut. Make sure the door closes completely so no water leaks out of the shower. Install the plumbing attachments so you can take a shower as well as any extras you would like in the shower such as towel racks and containers for shampoo.
How do you remove flow restrictor in a danze shower head?
Remove the shower head, careful not to damage the finish - use a cloth and an adjustable wrench. With the head removed, use a Phillips head screw driver and unscrew the plastic restrictor. After the restrictor is a screen which might need to be cleaned. I had to remove the restrictor from mine because it caused the shower to squeal.
How do you get a silicone glue shower caddy off a fiberglass shower wall?
Yes, prise it off slowly with 2 wood chisels.
What is the best adhesive to install a soap dispenser in a fiberglass shower unit?
Liquid Nails
What types of materials are shower walls made of?
New shower stalls are made of different plastics or fiberglass. Older showers are ceramic tile.
What kind of paint can be used on exposed water resistant drywall in the shower?
If you expect your shower to last, then remove that drywall and re-finish it with concrete/fibre board. It's so much better than drywall you wouldn't believe it. Nobody professional does drywall around a shower anymore.
