I found some great videos about this on YouTube.. even if its not your specific model find one close and youll get the idea for sure
Lock the truck with remote then unlock truck manually with key
Not sure about manually but I used my key on driver side door and unlocked twice. Turn the key twice and you will hear it unlock. This popped the lock on the tailgate. When in doubt, always go to the drivers door!
Either the key pad on the drivers' door, the remote, or use the key.
First thing I'd do is check the fuse for the power doorlock circuit.
put key in ignition turn to first notch and press the remote either open or lock
its the fuse
I have an '04 Highlander and have this capability without any special programming. To unlock the drivers door ONLY, press the remote ONCE. To unlock ALL the doors AND the rear hatch, press the remote TWICE within 3 seconds.
One reason that your remote key will not unlock your Mazda 6 is that a fuse is blown. You may need to replace the batteries in the remote or reprogram the remote. A bad body control module is another reason the remote will not unlock the doors.
For Security so as nobody can jump in uninvited while you are getting yourself comfortable. Try pushing the button 2 or 3 times to unlock all doors.
To program a 2007 GMC Envoy remote, close all the doors. ?æInsert the key in the ignition while holding the unlock button on the drivers side. Turn ignition from on to off twice. ?æNow release the unlock button. ?æThe fob is ready to program.
Unlock the drivers door with the key or insert the key into the ignition switch and turn the switch to the on position will turn off the alarm.
Unlock the car with the remote or the key in the door.Unlock the car with the remote or the key in the door.