If your windows still work on the switch than it is most likely that the switch is bad I had the same problem with mine and it was the switch
1996 dodge ram 5.9 power steering pully removal?
To replace the window switch in your 2004 Dodge Intrepid you need to remove the door panel. Once the door panel is removed there are two T-20 Torx screws that hold the switch to the door panel. I have included a step by step auto repair video below, that shows how to accomplish this.
Remove the inside door panel. The entire power window mechanism will be visible. Put the window back onto the window track.
how to replace power window motor for 2003 dodge grand caravan? how to remove side panel dodge caravan 2003?
n power
Here are complete step-by-step instructions (with photos) on how to remove a door panel: http://www.ricksfreeautorepairadvice.com/repair-topics/window-power-repair/remove-a-door-panel-from-any-vehicle-without-a-diagram Here are complete step-by-step instructions (with photos) on how to test a power window motor to determine whether the problem is in the motor/regulator or the switch/wiring http://www.ricksfreeautorepairadvice.com/repair-topics/window-power-repair/replace-a-power-window-regulator -cable
* Remove the door trim panel * On power mirrors unplug the electrical connector * Remove the triangular cover over the mirror mounting * Remove the bolts and detach the mirror from the door * Installation is the reverse of removal
On a 2005 Ford Expedition : The power distribution box and the passenger compartment fuse panel are combined together It's located in the front passenger footwell , behind the kick panel * the kick panel swings out for removal to gain access to the fuse panel cover
Here are complete step-by-step instructions (with photos) on how to remove a door panel:http://www.ricksfreeautorepairadvice.com/repair-topics/window-power-repair/remove-a-door-panel-from-any-vehicle-without-a-diagram
remove door panel, install new window
A person can find a 1983 Dodge RamCharger Power window wiring diagram in the cars maintenance manual. They can also find it located in the repair manual.Ê
It is best to get the whole power window regulator assembly from the junkyard, which includes the power window motor. Cost should be no more than $40. Remove interior door trim panel by removing all screws and pulling up on the door panel. Unbolt existing window regulator assembly and slide guides from aluminum window track (you will have to uncrimp one end of track). Installation is the reverse of removal (remember to recrimp aluminum window track after reassembly). I did this repair in 45 minutes, power window worked like new. Good Luck!