Depends on what year and vehicle. If its a "smart key" better have dealer do it.
probably unsrew the old ignition and disconnect it from the cars battery then replace the new ignition and reconnect it to the car battery. you may or will need to take apart the dash board somehow. or you could just ask a mechanic.
take the old one out and put the new one in.
In order to replace the ignition switch in a 1997 Honda CR-V, you must first unplug the ignition switch power source. Unscrew the cover panel, remove the bolts holding the switch, and pull the switch out of the column. Replace the old ignition switch with the new ignition switch, return the bolts and screws, and reconnect the power source.
One per plug.
go buy a universal ignition key for it or replace the ignition switch, or lastly, replace the switch with a simple toggle switch. there should be some type of repair shop in your town, right? or do it the old fashioned way, hotwire the darn thing :)
usually buy pulling the old one off and putting new one in its place
what do the above letters stand for. im guessing lights,fan,heater,W?
how old is the battery if it is a few years old replace it you may have been running on the alternator only
To replace the ignition module in your Celebrity: Unplug the wires, take note of where they go so you can put them back in the correct place. Remove the screws that hold the ignition module in place. If the old module was coated with dielectric grease on the mounting surface put fresh dielectric grease on the replacement ignition module. Put the new ignition module in place and attach with the screws. Plug the wires back in their respective places.
Replace just the steering lock unit. The tumblers are old, and they need to be replaces. After replacing the lock, go to a locksmith, and have him re-key the doors to match your new ignition lock.
To change the ignition lock cylinder in a 2001 Chevrolet Tracker, first disarm the air bag system. Then remove the clock spring assembly to be able to remove the old ignition lock cylinder and replace with a new.
some low life scum tried to steal my 300zx, and totally f..cuk,d my ignition (key entry) and cant seem to work out the tool i need to remove the old one.. ?????