If you are asking about the headlight, it's a sealed beam. You will need to get a replacement sealed beam. To replace: disconnect negative battery terminal just in case not to short anything out. With the hood still open, remove the connector from the back of the light, remove a couple of Philips screws at the top of the light bracket, pull the bracket forward and downward, while taking the burned beam out. Slip the new one in. Replace in reverse order, and don't forget to reconnect the battery.
In front of left rear tire under body
There are two clips on the wall that holds the headlights. Push the clips away and pull the headlight housing out.
How can do I replace a water pump on a 96 camaro z28
more then likely w/ no more info then is provided there is a silver rod on top of the headlight pod you slide to the side then the whole light will come out and you can replace the bulb and reinstall.
Open the hood, remove the two locks that hold the headlight assembly in place, with the two locks removed you can wiggle the headlight assembly out and gain access to the back side of the assembly to remove and replace the headlight bulb.
the headlight assembly needs to come out in order to replace the bulb.
The 1994 Chevy Camaro horn is located in the front of the engine compartment. The horn will be on the right hand side of the radiator.
The headlight fuse located on a 1995 Chevy Tahoe is under the hood. It is located in the fuse box on the passenger side.
lift the plastic cover twist the old bulb out unplug it reinstall
The bulbs unscrew from the back of the light assy. sometimes you have to remove it to get to the back.
It is built into the headlight switch.
WHAT YEAR ?????