make sure the ignition is off and remove the door to the fuse panel located on the driver side dash, facing the driver's door, there is a red RESET button in the fuse panel, push and hold the RESET button until you hear 3 beeps and then you can turn the ignition to on and the CHANGE OIL light will now be off.
Check the engine coolant... Is it full? yes coolant level is full
There are pages and pages of things that can cause a check engine light. You need to have it checked with a scantool. Then the code can be diagnosed and repaired.
The check engine light has nothing to do with an oil change. The check engine light is reset with a scan tool after repairing the failure that caused it.
check lugnutpatterns.com
check out lugnutpatterns.com
There are pages and pages of things that can cause a check engine light. You need to have it checked with a scantool. Then the code can be diagnosed and repaired.
pontiac g6 check engine light car with wrench
There are pages and pages of things that can cause a check engine light. You need to have it checked with a scantool. Then the code can be diagnosed and repaired.
is the computer setting a code or check engine light, if not it could be your crank sensor.
Check on the engine block or intake manifold of your motor. Most engines are cast with that information right on it.
Try disconnecting battery for about 10 mins. or have vehicle scanned and codes cleared
It might cause the "check engine" light to come on.