To unhook a factory alarm system look for the alarm brain on the dash and Cut the two red and blue wires. Reconnect the wires and the alarm will be reset it self.
The factory alarm is built into the Body Computer. It is not possible to unhook it.
The factory alarm can not be disabled. It is part of the body and engine computers. It is reset by unlocking the doors with a key or remote.
Can you unhook the battery for a few minutes and reset the system?
Yes. Unhook and plug the hose going to the distributor, set the timing to factory specs, then replace the hose.
no
Unhook battery cables and then hook back up. Just a temporary fix for an alarm that won't stop. The system can't be completely disarmed unless you want to take a chance on the engine being disabled.
unhook the battery for about 2mi. that well resetthe elecrical If you are taking about resetting the check engine light, then you will need an OBD2 scan tool. Removing the battery cable will not reset the check engine light.
unhook
If it is your car no, the GPS is also yours to do with as you wish.
There is 3 long wire that you need to unhook. 1 is behind the glovebox. Unhook the glovebox and you can clearly see the wire. 2 is on the right of the gas pedal. After all 3 is unhooked, you can pry out the cover and disconnect the A/C and clock wire. The stereo will be revealed and unscrew the 4 screws that holds the stereo in place. Then unhook the back of the stereo.
Please unhook the latch for me.
yes there was an alarm on some 1998s look under the steering by ther brake pedal there is a big box that should say code alarm system unhook the plugs from this it will disarm alarm and let you do what you want