position/clamp the tool over the inlet flow tubing. hold tightly and push in towards the fuel filter to unlock the plastic clip of the pressure hose. pull the outlet clamp/lock up off and out of the way on the outlet side. perfom same procedure as the inlet side to disconnect it.
Go to your local auto parts house and buy the special tool for ford quick discaonnect fuel lines.
Its called a Quick-disconnect tool its like 10-15$ at a parts store
You need to get a quick disconnect tool from any parts house to remove the fuel lines.
Use a fuel/AC quick disconnect tool to remove fuel lines from filter. Plug fuel lines as they removed to reduce amount of fuel spilt. Remove 1/2" nut, located on outside of frame, that holds filter retaining clip inplace. Exchange filters and reattach retaining clip. Use quick disconnect tool to reattach fuel lines.
insert a quick disconnect tool into the coupler , the same tool you would use to disconnect fuel lines.
You have to drop fuel tank and use quick disconnect tool to change lines
buy a fuel Quick disconnect tool. They make cheap plastic ones, and slightly more expensive metal ones
With a quick disconnect tool. Your local auto parts store has them and they are not expensive.
if you look from the rear of the vehicle on the underneath, the fuel filter is on the passenger side above the rear beam. It has 3 fule lines that connect into it and requires a quick disconnect tool to remove the fuel lines.
The fuel lines disconnect at the tank and yes there is a tool required. You can get it at advanced or discount auto for a couple of bucks.
How do you change the fuel filter on a 1992 Chrysler New Yorker? Do you need a special tool to remove the quick disconnect? How do you change the fuel filter on a 1992 Chrysler New Yorker? Do you need a special tool to remove the quick disconnect?
ford fuel line disconnect tool. available at your local auto parts store.