It is basically the same as a regular pipe wrench except on the inside. It is sized for the pipe and has a toothed section that grabs when it is turned. You turn it with a wrench or socket. They will not take as much strain as a regular pipe wrench.
A strap wrench Or an inside wrench
I tried to wrench the pipe out of the hole with all my might!
There is an internal pipe wrench that goes inside the pipe and expands as you turn it and it turns out the broken piece. You should be able to get the tool at a hardware store.
use a pair of channel locks, or a pipe wrench,
You insert the correct size wrench into the pipe and as you unscrew it, a cam grabs the inside and hopefully unscrews the nipple. It may break also. Most pipes are rusted too tight for an internal pipe wrench to loosen them. What you can do that takes a little time is insert a hacksaw blade in the nipple and cut a notch through the nipple. This relives the pressure on the nipple. Tap around the edge with a screwdriver or chisel and then try the wrench. For extremely rusty pipes, cut the nipple in 3 places and knock out the pieces.
Yes, most plumbers use at least 3 pipe wrenches, (12", 18" and 24 " ) and a large crescent wrench.
it is used to fix pipes or to install pipes eg.a plumber would use the monkey wrench to fix or install a pipe
try an "internal" pipe wrench, these can be purchased at mscdirect.com, they have a cam on them that grabs as its turned inside of a pipe.
i think Ridgid 31005 8" Straight Pipe Wrench is best.
inch wide adjustable wrench
A pipe wrench, or an adjustable wrench, is used for any job which requires being able to adjust the wrench after inserting it into a tight or confined space, such as when attaching pieces of pipe together near a wall.
easy to use and easy to adjust size or measurement when using a pipe wrehch.